Brekeke Forum - Search : Brekeke PBX, Brekeke SIP Server, Multi-Tenant Hosted PBX

ports 10000-10999 are available on the server.
in addition, i forgot to mention in my initial post, i am able to successfully connect to my room's endpoints every time with 2-way audio if i use x-li ...

The &net.sip.replacesdp.multipart as posted is the copy/paste from brekeke. I am not able to attain the packets from the handset side currently. Client is not behind a NAT. any thoughts of why ...

1. Brekeke Product Name and version:Brekeke SIP Server/2.3.8.2/286

2. Java version:1.6.0_16

3. OS type and the version:Windows 2003 R2

4. UA (phone), gateway or other hardware/software involv ...

Brian,
I know that ASCOM requires you to setup an account for them to use. I used "9999" for them to register to brekeke.

In addition, we had an issue at one point, where ASCOM's calls w ...

i am able to establish the call based on this dial plan:
Matching:
$request=^INVITE
To=sip:([0-9]{3})([0-9]{4})([0-9]{1,2});.*@
Deploy:
To=sip:%1%2*%3@IP

Matching:
$request=^INVITE
To=To=si ...

Yes the destination URI's are registered.

here is the syntax i got working after working with Support using an X-Lite Phone:

Dial Plan 1
Matching:
$request=^INVITE
To=sip:([0-9]{6})([0-9] ...

Justin to direct your calls for the emergency calls in the Rauland system you would have to have "Teams" built in the Responder5 system. For example: Code Blue Team
This team would be set t ...

1. Brekeke Product Name and version:Brekeke SIP Server 2.3.8.2

2. Java version:1.6.0_16

3. OS type and the version: Windows 2003 R2 Standard

4. UA (phone), gateway or other hardware/software ...

1. Brekeke Product Name and version:

2. Java version:

3. OS type and the version:

4. UA (phone), gateway or other hardware/software involved:

5. Select your network pattern from http://www ...

got mine to work. It was a port conflict between the Rauland software and Brekeke. I was able to change the port on the Rauland system and it worked fine. Also, i had to force RTP = ON as well to get ...

I was able to get this working Justin. I have the Brekeke actually loaded on the Rauland Gateway server, which in turn uses port5060. so i had a conflict there. So i had to change the Responder Gatewa ...

i am interested in this as well. Since i am doing the same thing as you Justin. I have Brekeke loaded onto the RGS server (got it working finally by changing the SIP port RGS uses) i have a dial plan ...

TMAN - I am new as well using Brekeke with Responder Gateway server. I am struggling right now to get the Patient Stations to register with Brekeke....any suggestions? If i point the Registrar IP to t ...