Author |
Message |
Topic: Cisco CallManager 8.X upper/through registration via Brekeke |
hope
Replies: 6
Views: 8161
|
Forum: Brekeke SIP Server Forum Posted: Tue May 27, 2014 10:49 pm Subject: Cisco CallManager 8.X upper/through registration via Brekeke |
check if the authentication password is set correct and the same on both phone and cisco side or reset it on both phone and Cisco sides. |
Topic: Cisco CallManager 8.X upper/through registration via Brekeke |
hope
Replies: 6
Views: 8161
|
Forum: Brekeke SIP Server Forum Posted: Tue May 27, 2014 8:11 pm Subject: Cisco CallManager 8.X upper/through registration via Brekeke |
- Are both phones shown at Brekeke SIP Sever/Registered Clients page?
- capture packets at Brekeke server and check what error response is sent for the second phone's register request |
Topic: Unable to get Conference feature to work |
hope
Replies: 2
Views: 6243
|
Forum: Brekeke SIP Server Forum Posted: Mon May 05, 2014 5:17 pm Subject: Unable to get Conference feature to work |
- is the caller registered at pbx/sip server?
- can the caller phone call to other extensions without issue?
- is there ARS used for the conference call?
- capture packets at pbx server machine and ... |
Topic: Integration Problem Responder 5 Call Manager |
hope
Replies: 9
Views: 10576
|
Forum: Brekeke SIP Server Forum Posted: Thu Apr 24, 2014 7:33 pm Subject: Integration Problem Responder 5 Call Manager |
check the following setting at Cisco side:
- if brekeke server IP is set in Cisco SIP trunk
- if 172.16.1.10 is the primary handler IP address at cisco side for receiving calls
http://www.brekeke ... |
Topic: header rewrite after re-invite |
hope
Replies: 4
Views: 7178
|
Forum: Brekeke SIP Server Forum Posted: Tue Apr 22, 2014 10:05 am Subject: header rewrite after re-invite |
what happen if set b2bua off? |
Topic: RFC3327's Path Header |
hope
Replies: 2
Views: 6421
|
Forum: Brekeke SIP Server Forum Posted: Tue Apr 22, 2014 10:04 am Subject: RFC3327's Path Header |
http://wiki.brekeke.com/wiki/BSS-Path-RFC3327-Support |
Topic: Integration Problem Responder 5 Call Manager |
hope
Replies: 9
Views: 10576
|
Forum: Brekeke SIP Server Forum Posted: Mon Apr 21, 2014 12:47 pm Subject: Integration Problem Responder 5 Call Manager |
- what dial plan rules are created at brekeke server? paste them in order shown from Brekeke SIP Server
- What transport is used at Cisco side?
if it is tcp, need to add following line in the dial ... |
Topic: Billing Solution |
hope
Replies: 2
Views: 5870
|
Forum: Brekeke SIP Server Forum Posted: Mon Apr 21, 2014 10:20 am Subject: Billing Solution |
how about Radius server?
http://wiki.brekeke.com/wiki/Radius-Server |
Topic: header rewrite after re-invite |
hope
Replies: 4
Views: 7178
|
Forum: Brekeke SIP Server Forum Posted: Thu Apr 17, 2014 2:43 pm Subject: header rewrite after re-invite |
you may need session plug-in to modify the requests in the middle of a session
http://www.brekeke.com/support/sip_document.php
"Developer's Guide: Accounting Plug-in" |
Topic: How to convert TLS to UDP / UDP to TLS? |
hope
Replies: 3
Views: 6182
|
Forum: Brekeke SIP Server Forum Posted: Sun Apr 13, 2014 12:23 am Subject: How to convert TLS to UDP / UDP to TLS? |
Advanced edition of Brekeke SIP Server supports TLS
and convert to other transport with $transport setting in dial plan rule "Deploy Patterns" as wiki page below
http://wiki.brekeke.com/wi ... |
Topic: How to cross calls between two servers |
hope
Replies: 4
Views: 7009
|
Forum: Brekeke SIP Server Forum Posted: Wed Apr 02, 2014 8:47 am Subject: How to cross calls between two servers |
Rule: Accept calls from the other server
-------------------------------
[Matching Patterns]
$request = ^INVITE
$addr = other_server_IP_address
To = sip:(.+)@
[Deploy Patterns]
$auth = false
... |
Topic: Integrating Brekeke PBX with Microsoft Lync 2013 server |
hope
Replies: 1
Views: 7923
|
Forum: Brekeke PBX Forum Posted: Wed Apr 02, 2014 8:45 am Subject: Integrating Brekeke PBX with Microsoft Lync 2013 server |
http://wiki.brekeke.com/wiki/Brekeke-PBX-and-Microsoft-Lync-or-OCS |
Topic: problem setting VPN |
hope
Replies: 10
Views: 10583
|
Forum: Brekeke SIP Server Forum Posted: Tue Apr 01, 2014 6:55 pm Subject: problem setting VPN |
for the client registered through VPN, set dial plan rule in wiki page
http://wiki.brekeke.com/wiki/Brekeke-settings-for-VPN |
Topic: Problem with Cisco to Responder 5 - Busy 486 |
hope
Replies: 4
Views: 7753
|
Forum: Brekeke SIP Server Forum Posted: Fri Mar 28, 2014 11:38 am Subject: Problem with Cisco to Responder 5 - Busy 486 |
Capture packets at Brekeke server and check
- Is there SDP shown in the INVITE packets sent from Cisco?
- if there is any session timer, Alert-Info, P-Location headers used at cisco invite, disable ... |
Topic: How can I make a call between extensions? |
hope
Replies: 1
Views: 6948
|
Forum: Brekeke PBX Forum Posted: Fri Mar 28, 2014 11:26 am Subject: How can I make a call between extensions? |
http://wiki.brekeke.com/wiki/Brekeke-PBX-v3-Quickstart
check setup as wiki page above
- is there any sip users shown from sip server side "Registered Clients" side?
- did you assign the ... |
Topic: Problem with Cisco to Responder 5 - Busy 486 |
hope
Replies: 4
Views: 7753
|
Forum: Brekeke SIP Server Forum Posted: Fri Mar 28, 2014 11:21 am Subject: Problem with Cisco to Responder 5 - Busy 486 |
http://www.brekeke.com/doc/sip/rauland_conf_notes/v3/rauland_cisco_bssv3.pdf
check if there is SDP in the invite sent from cisco to brekeke as in doc above section 2 - 2.1 Enable the MTP (Media Ter ... |
Topic: How to set Global IP/port forwarding for my Berkeke SIP3.3.4 |
hope
Replies: 3
Views: 6522
|
Forum: Brekeke SIP Server Forum Posted: Fri Mar 21, 2014 8:24 am Subject: How to set Global IP/port forwarding for my Berkeke SIP3.3.4 |
did you set 171.214.248.32 in sip server "Interface Address" field and restart sip server?
capture packets and check if phone register request sent to sip server and what response from sip ... |
Topic: How to set Global IP/port forwarding for my Berkeke SIP3.3.4 |
hope
Replies: 3
Views: 6522
|
Forum: Brekeke SIP Server Forum Posted: Thu Mar 20, 2014 11:58 pm Subject: How to set Global IP/port forwarding for my Berkeke SIP3.3.4 |
http://wiki.brekeke.com/wiki/Set-port-forwarding |
Topic: 403 Forbidden Error (Could not register with UA ) |
hope
Replies: 9
Views: 10321
|
Forum: Brekeke SIP Server Forum Posted: Thu Mar 20, 2014 8:36 am Subject: 403 Forbidden Error (Could not register with UA ) |
compare packets of register between xlite and mobile device for difference
maybe there is route to other address in mobile device's register request? |
Topic: 403 Forbidden Error (Could not register with UA ) |
hope
Replies: 9
Views: 10321
|
Forum: Brekeke SIP Server Forum Posted: Wed Mar 19, 2014 11:29 pm Subject: 403 Forbidden Error (Could not register with UA ) |
if the same issue happen with other phone registration? like register with xlite
is there upper registration set at brekeke server configuration/SIP page?
capture packets about registration and chec ... |
Topic: 403 Forbidden Error (Could not register with UA ) |
hope
Replies: 9
Views: 10321
|
Forum: Brekeke SIP Server Forum Posted: Wed Mar 19, 2014 9:16 am Subject: 403 Forbidden Error (Could not register with UA ) |
check if you set any upper registration or dial plan to route the register to other IP |
Topic: Force g711, but keep 101 telephone-event |
hope
Replies: 2
Views: 6585
|
Forum: Brekeke SIP Server Forum Posted: Tue Mar 18, 2014 4:06 pm Subject: Force g711, but keep 101 telephone-event |
http://wiki.brekeke.com/wiki/Change-payload-type |
Topic: Brekeke Web Service Developer |
hope
Replies: 1
Views: 7164
|
Forum: Brekeke PBX Forum Posted: Tue Mar 11, 2014 9:51 am Subject: Brekeke Web Service Developer |
there is sample at
http://www.brekeke.com/downloads/pbx-developer-tool.php |
Topic: NAT: One way Audio and disconnect after 10 minutes |
hope
Replies: 6
Views: 8090
|
Forum: Brekeke SIP Server Forum Posted: Mon Mar 10, 2014 10:19 am Subject: NAT: One way Audio and disconnect after 10 minutes |
did you set port forwarding at router at Brekeke side and external IP at Brekeke SIP Server?
http://wiki.brekeke.com/wiki/Set-port-forwarding |
Topic: force rtp relay for a specific user or ip |
hope
Replies: 1
Views: 5789
|
Forum: Brekeke SIP Server Forum Posted: Mon Mar 03, 2014 6:33 pm Subject: force rtp relay for a specific user or ip |
create dial plan rule to catch the call from/to this user and set $rtp=on in rule [Deploy Patterns]
but not sure if above setting will solve your issue.
In v3.3.x there are following settings at ... |
|