Author |
Message |
Topic: Delaying the transmission of SIP Invites |
redroof
Replies: 3
Views: 9329
|
Forum: Brekeke SIP Server Forum Posted: Thu Jun 01, 2023 12:18 pm Subject: Delaying the transmission of SIP Invites |
Let you send the SIP-INVITE's Call-ID with APNS notification.
so the app can confirm whether it is a previously received call or not.
If it is a received call, the app should ignore that APNS notifi ... |
Topic: Delaying the transmission of SIP Invites |
redroof
Replies: 3
Views: 9329
|
Forum: Brekeke SIP Server Forum Posted: Tue May 30, 2023 1:34 pm Subject: Delaying the transmission of SIP Invites |
> issues with the APNS arriving before the SIP invite.
Do you want to get a SIP-INVITE before the APNS? |
Topic: BSS upgrade fee & upgrade procedure |
redroof
Replies: 1
Views: 8485
|
Forum: Brekeke SIP Server Forum Posted: Wed Jan 18, 2023 3:52 pm Subject: BSS upgrade fee & upgrade procedure |
My BSS Adv (v3.9.5.8. redundancy function test fail but I use BSS Adv (v3.14.3.5 trial version) redundancy function is ok.(ps: same environment except BSS)
Because there are many changes including ... |
Topic: Can Corretto be used instead of Orcale Java or OpenJDK? |
redroof
Replies: 3
Views: 9037
|
Forum: Brekeke SIP Server Forum Posted: Thu Oct 13, 2022 8:11 am Subject: Can Corretto be used instead of Orcale Java or OpenJDK? |
It seems that the Brekeke SIP Server is running without any issues. |
Topic: Can Corretto be used instead of Orcale Java or OpenJDK? |
redroof
Replies: 3
Views: 9037
|
Forum: Brekeke SIP Server Forum Posted: Wed Oct 12, 2022 7:35 pm Subject: Can Corretto be used instead of Orcale Java or OpenJDK? |
Can you access to the Brekeke SIP Server's GUI page?
If so, Brekeke SIP Server is running with Amazon Corretto.
Because Brekeke SIP Server supports Java 11, there will be no problems. |
Topic: sip client shows error: not found. |
redroof
Replies: 14
Views: 16084
|
Forum: Brekeke SIP Server Forum Posted: Tue Sep 20, 2022 10:41 am Subject: sip client shows error: not found. |
> // only the history from the SIP phone from 172.27.0.123. no other records.
172.27.0.123 is the Server's IP address. Do you run a SIP phone app on the server's localhost?
According to your ... |
Topic: sip client shows error: not found. |
redroof
Replies: 14
Views: 16084
|
Forum: Brekeke SIP Server Forum Posted: Thu Sep 15, 2022 11:15 am Subject: sip client shows error: not found. |
Can you send a ping to 172.27.0.123 from other phones network environments?
Did you set "172.27.0.123" as the SIP Registrar's IP address at other phones?
Can you see SIP-REGISTER sent ... |
Topic: sip client shows error: not found. |
redroof
Replies: 14
Views: 16084
|
Forum: Brekeke SIP Server Forum Posted: Wed Aug 31, 2022 1:49 pm Subject: sip client shows error: not found. |
The rule "outbound call" has the issue because it doesn't have any Matching pattern conditions. (it means this rule catches REGISTER request too..)
Generally, you don't need any DialPlan ... |
Topic: sip client shows error: not found. |
redroof
Replies: 14
Views: 16084
|
Forum: Brekeke SIP Server Forum Posted: Tue Aug 30, 2022 8:01 am Subject: sip client shows error: not found. |
Can you see 172.27.0.123 at [interface] field in [Status]->[SIP Server Status] page?
Did you edit the DialPlan file "dialplan.tbl" directly? |
Topic: sip client shows error: not found. |
redroof
Replies: 14
Views: 16084
|
Forum: Brekeke SIP Server Forum Posted: Mon Aug 29, 2022 12:33 pm Subject: sip client shows error: not found. |
Is the SIP Server running on 172.27.0.123?
Can you see 172.27.0.123 at [interface] field in [Status]->[SIP Server Status] page? |
Topic: sip client shows error: not found. |
redroof
Replies: 14
Views: 16084
|
Forum: Brekeke SIP Server Forum Posted: Wed Aug 24, 2022 9:31 am Subject: sip client shows error: not found. |
Did you get "not found" error just after the SIP phone sent a SIP-REGISTER request?
Are you using any DialPlan rules at your Brekeke SIP Server?
Are you using SIP authentication at your ... |
Topic: Blocking Inbound Call by Caller ID |
redroof
Replies: 3
Views: 9321
|
Forum: Brekeke SIP Server Forum Posted: Wed Aug 03, 2022 3:25 pm Subject: Blocking Inbound Call by Caller ID |
"^Invite" should be "^INVITE" so the Matching pattern will be like this
Matching Patterns:
$request = ^INVITE
From = sip:12223334444 |
Topic: 302 Redirect for STIR/SHAKEN Service |
redroof
Replies: 13
Views: 11915
|
Forum: Brekeke SIP Server Forum Posted: Tue Jun 07, 2022 7:45 pm Subject: 302 Redirect for STIR/SHAKEN Service |
Matching Pattern is depending on your routing needs.
Simply it can be written as
Matching Pattern
$request = ^INVITE |
Topic: 302 Redirect for STIR/SHAKEN Service |
redroof
Replies: 13
Views: 11915
|
Forum: Brekeke SIP Server Forum Posted: Fri Jun 03, 2022 10:32 am Subject: 302 Redirect for STIR/SHAKEN Service |
That's why you need to specify the IP address of the upstream service provider at the redirect server in STIR/SHAKEN service. |
Topic: Switching from Java to AdoptOpenJDK 11 (HotSpot) |
redroof
Replies: 8
Views: 9519
|
Forum: Brekeke SIP Server Forum Posted: Mon Apr 11, 2022 11:20 am Subject: Switching from Java to AdoptOpenJDK 11 (HotSpot) |
You may need to request a license transfer if it was activated with Offline activation method.
https://docs.brekeke.com/lic/license-transfer-request
Otherwise, re-activate the license at new locat ... |
Topic: WebRTC to SIP Calling |
redroof
Replies: 1
Views: 3708
|
Forum: Brekeke SIP Server Forum Posted: Tue Feb 15, 2022 12:43 pm Subject: WebRTC to SIP Calling |
If you want to make call from a WebRTC client such as JsSIP, a callee client must support ICE and DTLS.
So you can make call from JsSIP to another JsSIP without any issues.
But most of non-WebRTC S ... |
Topic: Switching from Java to AdoptOpenJDK 11 (HotSpot) |
redroof
Replies: 8
Views: 9519
|
Forum: Brekeke SIP Server Forum Posted: Wed Jan 12, 2022 1:57 pm Subject: Switching from Java to AdoptOpenJDK 11 (HotSpot) |
Have you tried 3.12.1.5 with AdoptOpenJDK 11?
If it was 3.9.1.3, the installation will fail because that version didn't support AdoptOpenJDK.
If you want to try AdoptOpenJDK 11, please use a version ... |
Topic: b2b is true but leg-b still shows the ip address of leg-a |
redroof
Replies: 22
Views: 15679
|
Forum: Brekeke SIP Server Forum Posted: Fri Sep 28, 2018 11:21 am Subject: b2b is true but leg-b still shows the ip address of leg-a |
I tested your DialPlan rule in my BSS 3.8.5.2 and I confirmed that the From-URI is NOT replaced without tuning the rule.
It means 3.8.6.4 and 3.8.5.2 are same in this case.
If you paste all of yo ... |
Topic: b2b is true but leg-b still shows the ip address of leg-a |
redroof
Replies: 22
Views: 15679
|
Forum: Brekeke SIP Server Forum Posted: Fri Sep 28, 2018 11:07 am Subject: b2b is true but leg-b still shows the ip address of leg-a |
In your first post, why did you set "$addr=192.168.2.10" in the Matching Patterns?
Because 192.168.2.10 is one of BSS's interface addresses, $addr must be 192.168.2.5, UAC's IP address.
... |
Topic: Feature Request |
redroof
Replies: 1
Views: 4311
|
Forum: Brekeke SIP Server Forum Posted: Thu Sep 27, 2018 5:17 pm Subject: Feature Request |
$time("HH:mm:ss.SSSS")
I recommend that you read the admin guide. |
Topic: b2b is true but leg-b still shows the ip address of leg-a |
redroof
Replies: 22
Views: 15679
|
Forum: Brekeke SIP Server Forum Posted: Thu Sep 27, 2018 4:19 pm Subject: b2b is true but leg-b still shows the ip address of leg-a |
There are several conditions.
Is the UAC registered in the Brekeke SIP Server?
If so, Brekeke SIP Server replaces From-URI automatically. |
Topic: b2b is true but leg-b still shows the ip address of leg-a |
redroof
Replies: 22
Views: 15679
|
Forum: Brekeke SIP Server Forum Posted: Thu Sep 27, 2018 2:34 pm Subject: b2b is true but leg-b still shows the ip address of leg-a |
Put this in Deploy Patterns
Deploy Patterns
From/uri = sip:%{$getSIPuser(From)}@192.168.10.11 |
Topic: b2b is true but leg-b still shows the ip address of leg-a |
redroof
Replies: 22
Views: 15679
|
Forum: Brekeke SIP Server Forum Posted: Thu Sep 27, 2018 1:07 pm Subject: b2b is true but leg-b still shows the ip address of leg-a |
Sorry.. because it depends on the version of Brekeke SIP Server.
Try $replaceuri = true |
Topic: b2b is true but leg-b still shows the ip address of leg-a |
redroof
Replies: 22
Views: 15679
|
Forum: Brekeke SIP Server Forum Posted: Thu Sep 27, 2018 11:04 am Subject: b2b is true but leg-b still shows the ip address of leg-a |
Put "$replaceuri.from = true" in the Deploy Patterns. |
Topic: &net.sip.loglevel.file doesn't work anymore? |
redroof
Replies: 9
Views: 7059
|
Forum: Brekeke SIP Server Forum Posted: Sun Nov 26, 2017 8:36 pm Subject: &net.sip.loglevel.file doesn't work anymore? |
> Yes, I've checked "Authentication/Radius" at the
Can you find "auth: NG" message in sv.xxxx.log?
> Is it possible that the default log level doesn't show it?
T ... |
|