Brekeke Forum Index

Search found 97 matches
Author Message
  Topic: 403 on invites from registered Firebrick devices
snuyzm

Replies: 3
Views: 3757

PostForum: Brekeke SIP Server Forum   Posted: Thu May 20, 2021 8:03 pm   Subject: 403 on invites from registered Firebrick devices
"realm" is required.

Since the device is registered in the SIP Server, so you can disable the Auth for INVITE with the following DialPlan rule.

[Matching Patterns]
$request = ^INVITE ...
  Topic: 403 on invites from registered Firebrick devices
snuyzm

Replies: 3
Views: 3757

PostForum: Brekeke SIP Server Forum   Posted: Fri May 14, 2021 1:06 pm   Subject: 403 on invites from registered Firebrick devices
Does Authorization: header have "realm" ?
  Topic: Certificate Expired Exception - WSS
snuyzm

Replies: 2
Views: 3570

PostForum: Brekeke PBX Forum   Posted: Wed Feb 03, 2021 5:16 pm   Subject: Certificate Expired Exception - WSS
Are you sure you uploaded the valid certificate file?
Compare signature of the certificate.
  Topic: BSS Acting as a SIP Redirect Server
snuyzm

Replies: 2
Views: 4449

PostForum: Brekeke SIP Server Forum   Posted: Fri Aug 28, 2020 8:24 am   Subject: BSS Acting as a SIP Redirect Server
Use a comma as a separator.

Contact = sip:%1@10.10.10.200,sip:%1@10.10.10.300,sip:%1@10.10.10.400
  Topic: A security scanner tripped on Brekeke
snuyzm

Replies: 28
Views: 23978

PostForum: Brekeke SIP Server Forum   Posted: Tue May 12, 2020 5:59 pm   Subject: A security scanner tripped on Brekeke
> but what I heard was "if Qualys's scan is a problem, bypass Qualys's scan."

Right. If all of SIP clients which access to your SIP Server support INVITE/REGISTER authentication, si ...
  Topic: A security scanner tripped on Brekeke
snuyzm

Replies: 28
Views: 23978

PostForum: Brekeke SIP Server Forum   Posted: Tue May 12, 2020 10:01 am   Subject: A security scanner tripped on Brekeke
> each individual rule having $auth=false in the deploy pattern.

It is the issue... you should not put $auth=false in the DialPlan rule which matches the Qualys's INVITE.

or... add another n ...
  Topic: A security scanner tripped on Brekeke
snuyzm

Replies: 28
Views: 23978

PostForum: Brekeke SIP Server Forum   Posted: Tue May 12, 2020 9:15 am   Subject: A security scanner tripped on Brekeke
Have you set REGISTER and INVITE Authentication in [Configuration]->[SIP] page??
  Topic: A security scanner tripped on Brekeke
snuyzm

Replies: 28
Views: 23978

PostForum: Brekeke SIP Server Forum   Posted: Tue Apr 28, 2020 3:59 pm   Subject: A security scanner tripped on Brekeke
Yes. It is the variable $auth.
so let you set $auth=false in the DeployPattern of the rule.
If so, the SIP Server doesn't require an INVITE to send an authentication.

FYI:
https://docs.brekeke. ...
  Topic: A security scanner tripped on Brekeke
snuyzm

Replies: 28
Views: 23978

PostForum: Brekeke SIP Server Forum   Posted: Tue Apr 28, 2020 10:07 am   Subject: A security scanner tripped on Brekeke
To enable both proxy and register authorizations, set the following settings at REGISTER = on
INVITE = on

They are On in the default but it seems you set "Off" for INVITE.
The B2B-UA ...
  Topic: Alphanumerics in User Name
snuyzm

Replies: 14
Views: 14565

PostForum: Brekeke SIP Server Forum   Posted: Mon Dec 16, 2019 11:56 am   Subject: Alphanumerics in User Name
If you still have the issue with the alphanumeric username, set "no" for the following settings in the no
no
  Topic: Alphanumerics in User Name
snuyzm

Replies: 14
Views: 14565

PostForum: Brekeke SIP Server Forum   Posted: Fri Dec 13, 2019 12:57 pm   Subject: Alphanumerics in User Name
> Any ideas as to why $registeredSender worked at first and then started to fail,


It seems that 3CX changes a source port number after while.
The $registeredSender method checks whether both ...
  Topic: Alphanumerics in User Name
snuyzm

Replies: 14
Views: 14565

PostForum: Brekeke SIP Server Forum   Posted: Tue Dec 10, 2019 4:38 pm   Subject: Alphanumerics in User Name
Can you find the record like "customer4171112222001" in the [Registered Clients] page after the SIP Server sends SIP 603?

If yes.. the SIP Server didn't receive subsequent REGISTER packet ...
  Topic: Alphanumerics in User Name
snuyzm

Replies: 14
Views: 14565

PostForum: Brekeke SIP Server Forum   Posted: Mon Dec 09, 2019 1:01 pm   Subject: Alphanumerics in User Name
> $registered("4171112222001") = true
> $addr = ^11.22.33.44$

The above rule will match even if a REGISTER was not sent from 11.22.33.44.

If you want to accept an INVITE sent fr ...
  Topic: Wrong IP in VIA header after session roll over
snuyzm

Replies: 7
Views: 11647

PostForum: Brekeke SIP Server Forum   Posted: Wed Nov 27, 2019 6:54 pm   Subject: Wrong IP in VIA header after session roll over
I think there are several ways to avoid the issue without having many DialPlan rules.

Let you contact Brekeke's support to report the issue.
  Topic: Wrong IP in VIA header after session roll over
snuyzm

Replies: 7
Views: 11647

PostForum: Brekeke SIP Server Forum   Posted: Wed Nov 27, 2019 2:00 pm   Subject: Wrong IP in VIA header after session roll over
This is because the SIP Server re-selects a destination side interface IP address.

If you use some tricks, you can avoid the issue.

Rule-1:
====================
[Matching Patterns]
$request = ...
  Topic: Alphanumerics in User Name
snuyzm

Replies: 14
Views: 14565

PostForum: Brekeke SIP Server Forum   Posted: Wed Nov 27, 2019 1:17 pm   Subject: Alphanumerics in User Name
Have you switched these Auth-user settings to "no"?

Check the [Logs]->[Error Logs] if the problem still happens.
  Topic: Alphanumerics in User Name
snuyzm

Replies: 14
Views: 14565

PostForum: Brekeke SIP Server Forum   Posted: Wed Nov 27, 2019 11:40 am   Subject: Alphanumerics in User Name
Are both SIP username and auth username same?

In your example, is 4171112222001 a SIP username?

Let you set "no" at [Auth-user=user in "To:" (Register) ] and [Auth-user=user ...
  Topic: Need Deployment Pattern - Route Calls to Registered Users
snuyzm

Replies: 9
Views: 10947

PostForum: Brekeke SIP Server Forum   Posted: Thu Sep 19, 2019 8:48 pm   Subject: Need Deployment Pattern - Route Calls to Registered Users
I tried the both Matching Pattern and Deploy Patten without any issues...

Check the log to see whether the rule is executed..
  Topic: Need Deployment Pattern - Route Calls to Registered Users
snuyzm

Replies: 9
Views: 10947

PostForum: Brekeke SIP Server Forum   Posted: Thu Sep 19, 2019 3:11 pm   Subject: Need Deployment Pattern - Route Calls to Registered Users
My first rule will meet the requirement because sip:99(16.+)@ will pick any 16xxxxx values if it starts with 99.

%1 in Deploy Patterns refers the first () in the Matching Patterns.

so the rule m ...
  Topic: Need Deployment Pattern - Route Calls to Registered Users
snuyzm

Replies: 9
Views: 10947

PostForum: Brekeke SIP Server Forum   Posted: Wed Sep 18, 2019 6:20 pm   Subject: Need Deployment Pattern - Route Calls to Registered Users
If a caller dials 9916998, do you want to route a call to 16998 which is Yealink's registered username?
If so, try the DialPlan I suggested in my previous post.

Or do you want to route any matched ...
  Topic: Need Deployment Pattern - Route Calls to Registered Users
snuyzm

Replies: 9
Views: 10947

PostForum: Brekeke SIP Server Forum   Posted: Wed Sep 18, 2019 3:58 pm   Subject: Need Deployment Pattern - Route Calls to Registered Users
Is "99" a prefix of the dialed number?
If you have ( ) in the Matching pattern, you can refer the matched value with %1 in the Deploy Pattern

For example:
[Matching Pattern]
$request=^ ...
  Topic: Need Deployment Pattern - Route Calls to Registered Users
snuyzm

Replies: 9
Views: 10947

PostForum: Brekeke SIP Server Forum   Posted: Wed Sep 18, 2019 2:59 pm   Subject: Need Deployment Pattern - Route Calls to Registered Users
There are several ways.
Can you paste your Matching Pattern here?
  Topic: Arbitrary 20 second timer affecting my failover dial plan ru
snuyzm

Replies: 3
Views: 11748

PostForum: Brekeke SIP Server Forum   Posted: Mon May 06, 2019 5:06 pm   Subject: Arbitrary 20 second timer affecting my failover dial plan ru
Have you tuned &failover.timer.inviting and &failover.timer.provisional?
  Topic: Best Way to Do the Number Translation
snuyzm

Replies: 1
Views: 2973

PostForum: Brekeke SIP Server Forum   Posted: Fri Aug 24, 2018 1:09 pm   Subject: Best Way to Do the Number Translation
Other options are...

D. using own plugin written by Java.
E. using SIP Redirect Server

Do you host a database on your premises?
If so, easiest way will be method B. "using the $db.que ...
  Topic: Register BSS to Cloud PBX
snuyzm

Replies: 3
Views: 4483

PostForum: Brekeke SIP Server Forum   Posted: Wed Aug 22, 2018 5:01 pm   Subject: Register BSS to Cloud PBX
At Brekeke SIP Server, disable REGISTER Authentication at [Configuration]->[SIP] page, and make sure the [Thru Registration] is "On". (For applying changes, you need to restart the SIP Se ...
 
Page 1 of 4 Goto page 1, 2, 3, 4  Next
All times are GMT - 7 Hours
Jump to: