Author |
Message |
Topic: 403 on invites from registered Firebrick devices |
snuyzm
Replies: 3
Views: 3895
|
Forum: Brekeke SIP Server Forum Posted: Thu May 20, 2021 8:03 pm Subject: 403 on invites from registered Firebrick devices |
"realm" is required.
Since the device is registered in the SIP Server, so you can disable the Auth for INVITE with the following DialPlan rule.
[Matching Patterns]
$request = ^INVITE
... |
Topic: 403 on invites from registered Firebrick devices |
snuyzm
Replies: 3
Views: 3895
|
Forum: Brekeke SIP Server Forum Posted: Fri May 14, 2021 1:06 pm Subject: 403 on invites from registered Firebrick devices |
Does Authorization: header have "realm" ? |
Topic: Certificate Expired Exception - WSS |
snuyzm
Replies: 2
Views: 4901
|
Forum: Brekeke PBX Forum Posted: Wed Feb 03, 2021 5:16 pm Subject: Certificate Expired Exception - WSS |
Are you sure you uploaded the valid certificate file?
Compare signature of the certificate. |
Topic: BSS Acting as a SIP Redirect Server |
snuyzm
Replies: 2
Views: 4585
|
Forum: Brekeke SIP Server Forum Posted: Fri Aug 28, 2020 8:24 am Subject: BSS Acting as a SIP Redirect Server |
Use a comma as a separator.
Contact = sip:%1@10.10.10.200,sip:%1@10.10.10.300,sip:%1@10.10.10.400 |
Topic: A security scanner tripped on Brekeke |
snuyzm
Replies: 28
Views: 24550
|
Forum: Brekeke SIP Server Forum Posted: Tue May 12, 2020 5:59 pm Subject: A security scanner tripped on Brekeke |
> but what I heard was "if Qualys's scan is a problem, bypass Qualys's scan."
Right. If all of SIP clients which access to your SIP Server support INVITE/REGISTER authentication, si ... |
Topic: A security scanner tripped on Brekeke |
snuyzm
Replies: 28
Views: 24550
|
Forum: Brekeke SIP Server Forum Posted: Tue May 12, 2020 10:01 am Subject: A security scanner tripped on Brekeke |
> each individual rule having $auth=false in the deploy pattern.
It is the issue... you should not put $auth=false in the DialPlan rule which matches the Qualys's INVITE.
or... add another n ... |
Topic: A security scanner tripped on Brekeke |
snuyzm
Replies: 28
Views: 24550
|
Forum: Brekeke SIP Server Forum Posted: Tue May 12, 2020 9:15 am Subject: A security scanner tripped on Brekeke |
Have you set REGISTER and INVITE Authentication in [Configuration]->[SIP] page?? |
Topic: A security scanner tripped on Brekeke |
snuyzm
Replies: 28
Views: 24550
|
Forum: Brekeke SIP Server Forum Posted: Tue Apr 28, 2020 3:59 pm Subject: A security scanner tripped on Brekeke |
Yes. It is the variable $auth.
so let you set $auth=false in the DeployPattern of the rule.
If so, the SIP Server doesn't require an INVITE to send an authentication.
FYI:
https://docs.brekeke. ... |
Topic: A security scanner tripped on Brekeke |
snuyzm
Replies: 28
Views: 24550
|
Forum: Brekeke SIP Server Forum Posted: Tue Apr 28, 2020 10:07 am Subject: A security scanner tripped on Brekeke |
To enable both proxy and register authorizations, set the following settings at REGISTER = on
INVITE = on
They are On in the default but it seems you set "Off" for INVITE.
The B2B-UA ... |
Topic: Alphanumerics in User Name |
snuyzm
Replies: 14
Views: 14924
|
Forum: Brekeke SIP Server Forum Posted: Mon Dec 16, 2019 11:56 am Subject: Alphanumerics in User Name |
If you still have the issue with the alphanumeric username, set "no" for the following settings in the no
no |
Topic: Alphanumerics in User Name |
snuyzm
Replies: 14
Views: 14924
|
Forum: Brekeke SIP Server Forum Posted: Fri Dec 13, 2019 12:57 pm Subject: Alphanumerics in User Name |
> Any ideas as to why $registeredSender worked at first and then started to fail,
It seems that 3CX changes a source port number after while.
The $registeredSender method checks whether both ... |
Topic: Alphanumerics in User Name |
snuyzm
Replies: 14
Views: 14924
|
Forum: Brekeke SIP Server Forum Posted: Tue Dec 10, 2019 4:38 pm Subject: Alphanumerics in User Name |
Can you find the record like "customer4171112222001" in the [Registered Clients] page after the SIP Server sends SIP 603?
If yes.. the SIP Server didn't receive subsequent REGISTER packet ... |
Topic: Alphanumerics in User Name |
snuyzm
Replies: 14
Views: 14924
|
Forum: Brekeke SIP Server Forum Posted: Mon Dec 09, 2019 1:01 pm Subject: Alphanumerics in User Name |
> $registered("4171112222001") = true
> $addr = ^11.22.33.44$
The above rule will match even if a REGISTER was not sent from 11.22.33.44.
If you want to accept an INVITE sent fr ... |
Topic: Wrong IP in VIA header after session roll over |
snuyzm
Replies: 7
Views: 11865
|
Forum: Brekeke SIP Server Forum Posted: Wed Nov 27, 2019 6:54 pm Subject: Wrong IP in VIA header after session roll over |
I think there are several ways to avoid the issue without having many DialPlan rules.
Let you contact Brekeke's support to report the issue. |
Topic: Wrong IP in VIA header after session roll over |
snuyzm
Replies: 7
Views: 11865
|
Forum: Brekeke SIP Server Forum Posted: Wed Nov 27, 2019 2:00 pm Subject: Wrong IP in VIA header after session roll over |
This is because the SIP Server re-selects a destination side interface IP address.
If you use some tricks, you can avoid the issue.
Rule-1:
====================
[Matching Patterns]
$request = ... |
Topic: Alphanumerics in User Name |
snuyzm
Replies: 14
Views: 14924
|
Forum: Brekeke SIP Server Forum Posted: Wed Nov 27, 2019 1:17 pm Subject: Alphanumerics in User Name |
Have you switched these Auth-user settings to "no"?
Check the [Logs]->[Error Logs] if the problem still happens. |
Topic: Alphanumerics in User Name |
snuyzm
Replies: 14
Views: 14924
|
Forum: Brekeke SIP Server Forum Posted: Wed Nov 27, 2019 11:40 am Subject: Alphanumerics in User Name |
Are both SIP username and auth username same?
In your example, is 4171112222001 a SIP username?
Let you set "no" at [Auth-user=user in "To:" (Register) ] and [Auth-user=user ... |
Topic: Need Deployment Pattern - Route Calls to Registered Users |
snuyzm
Replies: 9
Views: 11189
|
Forum: Brekeke SIP Server Forum Posted: Thu Sep 19, 2019 8:48 pm Subject: Need Deployment Pattern - Route Calls to Registered Users |
I tried the both Matching Pattern and Deploy Patten without any issues...
Check the log to see whether the rule is executed.. |
Topic: Need Deployment Pattern - Route Calls to Registered Users |
snuyzm
Replies: 9
Views: 11189
|
Forum: Brekeke SIP Server Forum Posted: Thu Sep 19, 2019 3:11 pm Subject: Need Deployment Pattern - Route Calls to Registered Users |
My first rule will meet the requirement because sip:99(16.+)@ will pick any 16xxxxx values if it starts with 99.
%1 in Deploy Patterns refers the first () in the Matching Patterns.
so the rule m ... |
Topic: Need Deployment Pattern - Route Calls to Registered Users |
snuyzm
Replies: 9
Views: 11189
|
Forum: Brekeke SIP Server Forum Posted: Wed Sep 18, 2019 6:20 pm Subject: Need Deployment Pattern - Route Calls to Registered Users |
If a caller dials 9916998, do you want to route a call to 16998 which is Yealink's registered username?
If so, try the DialPlan I suggested in my previous post.
Or do you want to route any matched ... |
Topic: Need Deployment Pattern - Route Calls to Registered Users |
snuyzm
Replies: 9
Views: 11189
|
Forum: Brekeke SIP Server Forum Posted: Wed Sep 18, 2019 3:58 pm Subject: Need Deployment Pattern - Route Calls to Registered Users |
Is "99" a prefix of the dialed number?
If you have ( ) in the Matching pattern, you can refer the matched value with %1 in the Deploy Pattern
For example:
[Matching Pattern]
$request=^ ... |
Topic: Need Deployment Pattern - Route Calls to Registered Users |
snuyzm
Replies: 9
Views: 11189
|
Forum: Brekeke SIP Server Forum Posted: Wed Sep 18, 2019 2:59 pm Subject: Need Deployment Pattern - Route Calls to Registered Users |
There are several ways.
Can you paste your Matching Pattern here? |
Topic: Arbitrary 20 second timer affecting my failover dial plan ru |
snuyzm
Replies: 3
Views: 12059
|
Forum: Brekeke SIP Server Forum Posted: Mon May 06, 2019 5:06 pm Subject: Arbitrary 20 second timer affecting my failover dial plan ru |
Have you tuned &failover.timer.inviting and &failover.timer.provisional? |
Topic: Best Way to Do the Number Translation |
snuyzm
Replies: 1
Views: 2999
|
Forum: Brekeke SIP Server Forum Posted: Fri Aug 24, 2018 1:09 pm Subject: Best Way to Do the Number Translation |
Other options are...
D. using own plugin written by Java.
E. using SIP Redirect Server
Do you host a database on your premises?
If so, easiest way will be method B. "using the $db.que ... |
Topic: Register BSS to Cloud PBX |
snuyzm
Replies: 3
Views: 4523
|
Forum: Brekeke SIP Server Forum Posted: Wed Aug 22, 2018 5:01 pm Subject: Register BSS to Cloud PBX |
At Brekeke SIP Server, disable REGISTER Authentication at [Configuration]->[SIP] page, and make sure the [Thru Registration] is "On". (For applying changes, you need to restart the SIP Se ... |
|