Author |
Message |
shakir Brekeke Newbie
Joined: 26 Apr 2007 Posts: 3
|
Posted: Thu Apr 26, 2007 7:59 am Post subject: Loop Detected |
|
|
1. Brekeke Product Name and version: sip2_0_4_1_windows_only
2. Java version: jdk1.5.0_10
3. OS type and the version: WIn XP
4. UA (phone), gateway or other hardware/software involved: Xlite
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem:
Hi,
I am using the Ondo server for sip phone, here i have my own proxy so the phone1 will send the call to ondo then the ondo sends to the proxy then the proxy have to forward the call to the phone2 thru ondo again
the rule i set here is
Matching Patterns Deploy Patterns
$request=^INVITE
$addr=^10\.232\.44\.235$ $target=10.232.15.18:5090
so here once the call reaches to 10.232.15.18:5090 then it gives loop detected error....
so plz help me to solve this
Shakir |
|
Back to top |
|
mexsip Brekeke Talented
Joined: 26 Apr 2005 Posts: 92
Location: Mexico
|
Posted: Wed May 02, 2007 5:53 pm Post subject: |
|
|
Hello shakir,
I'm not sure if I understand your problem:
phone1 -> brekeke sip server1 -> other proxy -> brekeke sip server1 -> phone2?
Is this what you want?
Regards,
Pablo. |
|
Back to top |
|
shakir Brekeke Newbie
Joined: 26 Apr 2007 Posts: 3
|
Posted: Wed May 02, 2007 8:36 pm Post subject: |
|
|
Yes exactly.....
here wheni am trying this configuration i am getting loop detected...
Shakir |
|
Back to top |
|
mexsip Brekeke Talented
Joined: 26 Apr 2005 Posts: 92
Location: Mexico
|
Posted: Thu May 03, 2007 7:36 am Post subject: |
|
|
why not configure like this:
phone1 -> sipserver -> phone2 ?
Pablo. |
|
Back to top |
|
shakir Brekeke Newbie
Joined: 26 Apr 2007 Posts: 3
|
Posted: Sun May 06, 2007 10:59 pm Post subject: |
|
|
phone1 -> sipserver -> phone2 ?
here my product will not get tested if i am configuring like this
so itshud be like
phone1 -> brekeke sip server1 -> other proxy -> brekeke sip server1 -> phone2 |
|
Back to top |
|
mexsip Brekeke Talented
Joined: 26 Apr 2005 Posts: 92
Location: Mexico
|
Posted: Mon May 07, 2007 10:12 am Post subject: |
|
|
Shakir,
with brekeke pbx you should be able to do your tests:
phone1 -> pbx1 -> other proxy -> pbx1 -> phone2.
Regards,
Pablo. |
|
Back to top |
|
voipwell.com Partner PBX
Joined: 20 Sep 2005 Posts: 528
Location: Tannersville, Pennsylvania
|
Posted: Wed May 09, 2007 12:27 pm Post subject: |
|
|
Brekeke's new version handles loops better. Try upgrading to support spiral (legal loop). |
|
Back to top |
|
clode Brekeke Newbie
Joined: 11 Apr 2007 Posts: 2
|
Posted: Wed May 09, 2007 3:28 pm Post subject: |
|
|
I have version 2.0.7.0/217 and still having the same problem
please advise if possible ... |
|
Back to top |
|
voipwell.com Partner PBX
Joined: 20 Sep 2005 Posts: 528
Location: Tannersville, Pennsylvania
|
Posted: Wed May 09, 2007 3:31 pm Post subject: |
|
|
New Version is 2.1 |
|
Back to top |
|
clode Brekeke Newbie
Joined: 11 Apr 2007 Posts: 2
|
Posted: Sat May 12, 2007 3:15 am Post subject: changed Config and it worked |
|
|
$request=^INVITE
$registered=true
To=sip:(.+)@(.+)
From=(2001.+)@(.+)
$addr=<Incoming from >
$auth=off
To=sip:%1@localhost or ip address
$replaceurl=true
$nat=true
$rtp=true
and it's working now on the same version .
hope this helps . |
|
Back to top |
|
voipwell.com Partner PBX
Joined: 20 Sep 2005 Posts: 528
Location: Tannersville, Pennsylvania
|
Posted: Sat May 12, 2007 5:10 pm Post subject: |
|
|
Thanks for posting the solution! |
|
Back to top |
|
|