Author |
Message |
loco_tdg Brekeke Member
Joined: 25 Apr 2007 Posts: 13
|
Posted: Thu Apr 26, 2007 9:58 am Post subject: Gateway with ARS |
|
|
Hi! One more question. How can i do in order to make a route with ARS, this route when you digit 9 followed by some digits take a pstn line in a gate, i need the command or the way to do that, i made that like the manual says but it does not work. Thanks |
|
Back to top |
|
voipwell.com Partner PBX
Joined: 20 Sep 2005 Posts: 528
Location: Tannersville, Pennsylvania
|
Posted: Thu Apr 26, 2007 11:33 am Post subject: |
|
|
The example I referred you to uses a 2 as a prefix, replace that with a 9. Of course in the example the ip addresses are examples, you must replace them with your actual ip addresses.
Nick |
|
Back to top |
|
loco_tdg Brekeke Member
Joined: 25 Apr 2007 Posts: 13
|
Posted: Thu Apr 26, 2007 12:26 pm Post subject: Ars route with a gate |
|
|
hi i sow the example with the sipura, but i´m not working with linksys, i want to know how to set this at ARS, Im working with a Gate 104 from Tigernetcom |
|
Back to top |
|
voipwell.com Partner PBX
Joined: 20 Sep 2005 Posts: 528
Location: Tannersville, Pennsylvania
|
Posted: Fri Apr 27, 2007 6:16 pm Post subject: |
|
|
Why do you think the ARS would be different for the Gate104. If the Gate104 has 1 stage dialing it should work. I have a gate104 but never tried 1 state dialing. Have you tried it with the spa-3000 ars example? |
|
Back to top |
|
loco_tdg Brekeke Member
Joined: 25 Apr 2007 Posts: 13
|
Posted: Sat Apr 28, 2007 11:48 am Post subject: ARS with gate 104 |
|
|
That gate is two stage dialing. I tried with the example of the manual, but it does not work. Help me!!! |
|
Back to top |
|
voipwell.com Partner PBX
Joined: 20 Sep 2005 Posts: 528
Location: Tannersville, Pennsylvania
|
Posted: Sun Apr 29, 2007 7:49 am Post subject: |
|
|
If it's two stage dialing then the best you can do is dial that device's extension, hear the dial tone of the pstn then dial the number. |
|
Back to top |
|
loco_tdg Brekeke Member
Joined: 25 Apr 2007 Posts: 13
|
Posted: Wed May 02, 2007 9:02 am Post subject: ARS with a gate |
|
|
Hi, I can make a call dialing the extension of that gate then calling some number, but my problem is that i have 15 gates and sometimes some of them are busy and i have to verifier which of them are not busy and i need to buy 5 more gates. |
|
Back to top |
|
voipwell.com Partner PBX
Joined: 20 Sep 2005 Posts: 528
Location: Tannersville, Pennsylvania
|
Posted: Wed May 02, 2007 6:56 pm Post subject: |
|
|
Well, that's not really a problem.
Let's say you have gates with user id's of 1-20. When someone wants to call they always dial 1 to get the first gate.
You set up a call hunting by going to user 1's screen and put in user 2 as the busy call forward number. Go to user 2 and put in 3 as the busy call forward. Go to user 3 and put in user 4 as the busy call forward all the way up to 20 and it will work fine. Brekeke can do anything(except shared call line appearance). |
|
Back to top |
|
|