crossroads Brekeke Junior Member
Joined: 19 Apr 2007 Posts: 6
|
Posted: Mon May 14, 2007 6:28 pm Post subject: modify "Expires" value for SUBSCRIBE-NOTIFY |
|
|
1. Brekeke Product Name and version: PBX2.0
2. Java version:1.5
3. OS type and the version: Server 2003
4. UA (phone), gateway or other hardware/software involved: Cisco 3640
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem:
I have few Phone device with multiple lines registered to the PBX with Voice mails. Our devices do MWI through SUBSCRIBE-NOTIFY. While sniffing the network, found that the NOTIFY is set to expire every 60 seconds and hence putting too much traffic from one single device on the n/w.
I would like to know how to modify the Expires to to some value in NOTIFY.
Thanks |
|