Is it possible to route between 2 ITSP?

hoanguyen · Brekeke Guru Joined: 01 May 2005 Posts: 139

1. Brekeke Product Name and version:

2. Java version:

3. OS type and the version:Version 1.5.3.0

4. UA (phone), gateway or other hardware/software involved: SPA-3000 with dynamic IP and using dyndns.org for solution.

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :

6. Your problem:
I have 2 ITSP with 2 inbound numbers, the call out is limit 1 call per outbound by ITSP.
Is it possible to have dial plan that check if the first one is in-use then change the route to second one?

Something like:

Matching patterns:
$request=^INVITE
To=(.*\.broadvoice\.com)
$port=15062
&& if inuse then

[u]Deploy Patterns:[/u]$
auth=off
$target=the second ITSP address.

Thks.

hoanguyen · Brekeke Guru Joined: 01 May 2005 Posts: 139

Anyone know this?

voipwell.com · Posted: Fri May 25, 2007 4:40 pm Post subject:

Hi,

That's a pbx feature. Hey, Brekeke needs to make a living some how. Smile

hoanguyen · Brekeke Guru Joined: 01 May 2005 Posts: 139

Hey,I got PBX ver 1.5.3.0 (small office) and it doesn't come with that feature.

voipwell.com · Posted: Tue May 29, 2007 11:28 am Post subject:

hoanguyen,

Sure it does come with that feature.

If you look at your ARS out section you will see two fields, Priorities and max sessions. Set your priority for the two itsp's. Broadvoice 1 and other isp 2. Then change max sessions from -1 which means unlimited to 1 which means 1 and if BV is busy it will send the call out to the other isp.

Nick