Author |
Message |
ancuser Brekeke Member
Joined: 13 Jun 2007 Posts: 17
Location: Chihuahua
|
Posted: Tue Jul 17, 2007 3:58 pm Post subject: for experts... |
|
|
1. Brekeke Product Name and version: 2.0
2. Java version: 1.5
3. OS type and the version: win 2003
4. UA (phone), gateway or other hardware/software involved: mediatrix 1204
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html : 2
6. Your problem:
Brekeke PBX supports the physical port selector in the gateway??
if i need make pstn call, doen pbx support selecting port in gateway?? |
|
Back to top |
|
pltec Brekeke Talented
Joined: 04 Nov 2005 Posts: 52
|
Posted: Wed Jul 18, 2007 6:53 am Post subject: Re: for experts... |
|
|
Budy... can you explain better what do you want???
I have 4 IPPBX plug in gatways....
2 are in quintum DX2030 and 2 are in cisco 2600...
maybe I can help you!!!
trank´s and best regards
Rafael Moraes
PL - Tecnologia - Brazil |
|
Back to top |
|
ancuser Brekeke Member
Joined: 13 Jun 2007 Posts: 17
Location: Chihuahua
|
Posted: Wed Jul 18, 2007 8:14 am Post subject: |
|
|
thanks, well my problem is the follow...
i have mediatrix 1204 as gateway, so i can receive calls and make calls too, but my question is, if can i configure the pbx 'ARS' to make the calls only for ports 3 and 4 because the ports 1 and 2 are the principal lines for incoming calls... for example
port 1 to receive call
port 2 to receive call
port 3 to receive and make celular calls with 044614+number
port 4 to receive and make local calls with 9+number
some like this, i want to do but is the brekeke pbx ARS can does this, or in other part of pbx, how do i do?
i make calls for any place only marking 9+number but the call take any port...
my ARS is this:
matching patterns: to sip:9(.+)@
deploy patterns: to sip:$1@172.16.1.25:5060
best regards..
Francisco Gonzalez
ADN Consulting Mexico |
|
Back to top |
|
|