| Author |
Message |
onecentld.com
Brekeke Junior Member
Joined: 20 Jun 2007
Posts: 6
|
 Posted: Tue Jul 17, 2007 6:02 pm Post subject: Our Terminator requires authentication, how do we set this? |
 |
|
1. Brekeke Product Name and version: Brekeke SIP Server 2.1.0.4/226
2. Java version: 1.6.0_01
3. OS type and the version: Win2003
4. UA (phone), gateway or other hardware/software involved:
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html : patern 9
6. Your problem: A call comes into our sip server from a sip phone and needs to be terminated by a terminator that requires sip authentication before the call will be accepted by the termination supplier, how do we configure this? |
|
| Back to top |
|
scottwu
Brekeke Junior Member
Joined: 18 Jun 2007
Posts: 8
|
|
| Back to top |
|
onecentld.com
Brekeke Junior Member
Joined: 20 Jun 2007
Posts: 6
|
| Posted: Wed Jul 18, 2007 12:31 pm Post subject: Brekeke Sip server needs to send authentication (register) |
|
|
I read that wiki and its not really helping....
Basically we need to send a username and password to our supplier before they will accept a call from us to route to the PSTN.
What that article seems to address is our Brekeke Sip Server checking usernames and passwords before we accept the call....
we need to send authentication to our provider.... |
|
| Back to top |
|
scottwu
Brekeke Junior Member
Joined: 18 Jun 2007
Posts: 8
|
| Posted: Wed Jul 18, 2007 3:03 pm Post subject: |
|
|
Sorry, i misunderstood your question before.
Try to set the dial plan:
| Matching Patterns | $request = ^INVITE
To = sip:(.*)@
| | Deploy Patterns | To = sip:%1@terminator
$auth = false
|
|
|
| Back to top |
|
|
