Brekeke Forum Index » Brekeke PBX Forum

Post new topic   Reply to topic
Detecting the talking starting&ending status of all call
Author Message
shin1063
Brekeke Newbie


Joined: 06 Aug 2007
Posts: 3

PostPosted: Wed Aug 08, 2007 9:40 pm    Post subject: Detecting the talking starting&ending status of all call Reply with quote

1. Brekeke Product Name and version: PBX 2.0

2. Java version: 1.5.0_06

3. OS type and the version: Windows XP SP2

4. UA (phone), gateway or other hardware/software involved: UAs and gateways

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html : Pattern 2

6. Your problem:

Hi,

I want my application to detect the talking starting & ending status of all PBX calls promptly without delay.

So, I tested PBX Call Log plug-in program.
As you know, it sends radius accounting start/stop packet to radius server.

The problem is that plug-in program sends radius accounting start packet when the talking ends.
So, I can't detect the call connection status promptly when the talking starts.

As far as I know, radius accounting start packet has to be sent when the call is established(talking starts) like SIP proxy 2.0.
But, PBX 2.0 doesn't send radius accounting start packet when the talking starts.
Instead, it sends start packet followed by stop packet when talking ends.

Is there other way for my application to detect these starting & ending status of all PBX calls promptly?

If PBX 2.0 is not yet implemented like this, I eagerly hope this feature will be applied to the next version of your plug-in program.

Thanks.
Regards, Shin
Back to top
View user's profile MSN Messenger
Display posts from previous:   
Post new topic   Reply to topic    Brekeke Forum Index » Brekeke PBX Forum All times are GMT - 7 Hours
Page 1 of 1