Author |
Message |
dannyremkes Brekeke Newbie
Joined: 22 Aug 2007 Posts: 2
|
Posted: Wed Aug 22, 2007 2:02 am Post subject: Incoming call number display |
|
|
1. Brekeke Product Name and version:
2. Java version:
3. OS type and the version:
windows XP
4. UA (phone), gateway or other hardware/software involved:
Cisco ip phones
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem:
How do i program the system that it shows incoming numbers in the display of my extensions the incoming number must be showed in a group of extensions.
I new to the SIP community anybody can help me on this?
(also checked allready other topics but none of them are really related to my problem).
Thanks
Danny |
|
Back to top |
|
peng Brekeke Guru
Joined: 20 Jul 2005 Posts: 110
|
Posted: Thu Sep 06, 2007 12:28 am Post subject: |
|
|
I might not understand what you mean.
But you can change the display name in From header using ARS so that you can see information you want on your sipphone. |
|
Back to top |
|
dannyremkes Brekeke Newbie
Joined: 22 Aug 2007 Posts: 2
|
Posted: Fri Sep 14, 2007 1:45 am Post subject: |
|
|
Dear Peng,
What i mean is incoming calls(for exaple from my mobile) distributed to a group of extensions dont give the incoming number in the displays it says only "system"
If i call my individual extension number from outside and only my phone is ringing then i see for example my mobile number,is that normal or not?
I have been working for many times with PABX´sand know that some manufactuers have problems with showing incoming numbers to a group of extension,instead of the number they give at that moment the name of the group.
Cheers,
Danny |
|
Back to top |
|
peng Brekeke Guru
Joined: 20 Jul 2005 Posts: 110
|
Posted: Sat Sep 29, 2007 6:24 pm Post subject: |
|
|
What version of Brekeke PBX are you using?
I think very old version worked as you said. |
|
Back to top |
|
|