Incoming call number display

[dannyremkes]

1. Brekeke Product Name and version:

2. Java version:

3. OS type and the version:
windows XP
4. UA (phone), gateway or other hardware/software involved:
Cisco ip phones
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :

6. Your problem:
How do i program the system that it shows incoming numbers in the display of my extensions the incoming number must be showed in a group of extensions.
I new to the SIP community anybody can help me on this?
(also checked allready other topics but none of them are really related to my problem).
Thanks

Danny

[peng]

I might not understand what you mean.
But you can change the display name in From header using ARS so that you can see information you want on your sipphone.

[dannyremkes]

Dear Peng,

What i mean is incoming calls(for exaple from my mobile) distributed to a group of extensions dont give the incoming number in the displays it says only "system"
If i call my individual extension number from outside and only my phone is ringing then i see for example my mobile number,is that normal or not?
I have been working for many times with PABX´sand know that some manufactuers have problems with showing incoming numbers to a group of extension,instead of the number they give at that moment the name of the group.


Cheers,
Danny

[peng]

What version of Brekeke PBX are you using?
I think very old version worked as you said.