Author |
Message |
veronica Brekeke Newbie
Joined: 07 Dec 2007 Posts: 2
|
Posted: Fri Dec 07, 2007 11:35 am Post subject: How configure the authentication for incoming calls |
|
|
1. Brekeke Product Name and version:
Brekeke SIP Server , Version 2.1.6.2 Evaluation
2. Java version:
Version 1.4.2_15
3. OS type and the version:
Win 2000
4. UA (phone), gateway or other hardware/software involved:
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem:
The brekeke sip Server is interconnected with a PSTN
The outcoming calls 192.168..101.12 (softphone) to 173.30.200.150 (gateway) is established but I am not getting any voice because the server immediately after I hang up sent a “bye”
The incoming calls isn’t established. And the server sent me a 603 code (decline)
I need to know how configure the authentication for incoming calls
thanks a lot
Last edited by veronica on Mon Dec 10, 2007 8:41 am; edited 1 time in total |
|
Back to top |
|
Mohney Brekeke Talented
Joined: 20 Nov 2007 Posts: 79
|
Posted: Fri Dec 07, 2007 1:34 pm Post subject: |
|
|
Are you using any DialPlan rules?
Which Softphone and gateway are you using?
--
Mohney |
|
Back to top |
|
veronica Brekeke Newbie
Joined: 07 Dec 2007 Posts: 2
|
Posted: Mon Dec 10, 2007 8:05 am Post subject: Reply |
|
|
The dial plan that we are using is:
For outcoming calls:
Matching Patterns | $request = ^INVITE To = sip:9(.+)@
|
Deply Patterns
To=sip%1@173.30.200.150
for incoming calls:
Matching Patterns | $request = ^INVITE $add = 173\.30\.200\.150
|
Deply Patterns
$auth= false
The softphone that we are using is:
SJPphone
The gateway in use belong to ericsson, and the ip address is :
173.30.200.150 |
|
Back to top |
|
Mohney Brekeke Talented
Joined: 20 Nov 2007 Posts: 79
|
Posted: Mon Dec 10, 2007 1:29 pm Post subject: |
|
|
Are you using same voice codec in both sides?
If you use another softphone (X-Lite..), same problem happens?
Anyway, "$add" should be "$addr".
--
Mohney |
|
Back to top |
|
|