soft phone does not register

[achachej]

1. Brekeke Product Name and version: sip server

BSS is behind nat


6. Your problem:
if a sip device tries to call even unregisztered, it shows in active sessions.

what should i setup so a softphone registers onto the sip server?
i addedd the user in user authentication.

should i setup something else so softphone registers?

thanks

[redroof]

you may find the register settings in your softphone..
so you need to set the Brekeke SIP Server's IP address as a registrar (or register server) there.

also, you need to set a username in the softphone. This username should be the same name which you created in the SIP Server's authentication..