Author |
Message |
syntax1269 Brekeke Member
Joined: 18 Nov 2007 Posts: 16
|
Posted: Thu Feb 21, 2008 12:47 pm Post subject: Brekeke and 3CX Connection |
|
|
1. Brekeke Product Name and version:
Brekeke SIP Server for Brekeke PBX, Version 2.1.6.6
2. Java version:
1.5.0_14
3. OS type and the version:
Windows 2003 R2
4. UA (phone), gateway or other hardware/software involved:
3CX
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
Pattern 9
6. Your problem:
I am tring to connect 3CX to Brekeke PBX.
UA connected to 3CX and using Brekeke to make the final termination to land/cell number.
what is happening is that the call goes as far as ring and when answerd the call drops. |
|
Back to top |
|
james Brekeke Master Guru
Joined: 10 Dec 2007 Posts: 494
|
Posted: Fri Feb 22, 2008 11:19 am Post subject: |
|
|
Hi,
Which audio codec did you use?
Can you see any error message at [Active Sessions] page? |
|
Back to top |
|
syntax1269 Brekeke Member
Joined: 18 Nov 2007 Posts: 16
|
Posted: Fri Feb 22, 2008 12:26 pm Post subject: |
|
|
James,
i am using uLaw.
I onle see the STUN error, and i tried to disable this, but the error jsut keeps coming up.
this is what i am getting on the status page
14:11:07.092 StratLink::onHangUp [CM104001] Call(23): Ext.10003 hung up call; cause: unknown
14:10:35.061 CallLegImpl::onConnected [CM103001] Call(23): Created audio channel for Ln:10001@DataWorld (209.208.XXX.XXX:10016) with Media Server (138.210.XXX.XXX:9032)
14:10:35.045 StratInOut::onConnected [CM104005] Call(23): Setup completed for call from Ext.10003 to Ln:10001@DataWorld
14:10:35.045 CallLegImpl::onConnected [CM103001] Call(23): Created audio channel for Ext.10003 (192.168.2.108:42750) with Media Server (138.210.XXX.XXX:7044)
14:10:34.045 MediaServerReporting::STUN [MS101003] Call(23) Ln:10001@DataWorld: Possible firewall problem. Address mapping failed on STUN server 138.210.XXX.XXX:3478 for local address ":9032"
14:10:33.873 CallConf::onIncoming [CM103002] Call(23): Incoming call from 10003 (Ext.10003) to sip:9800@138.210.XXX.XXX |
|
Back to top |
|
peng Brekeke Guru
Joined: 20 Jul 2005 Posts: 110
|
Posted: Sun Mar 02, 2008 4:38 pm Post subject: |
|
|
Can you capture the packets using WireShark? |
|
Back to top |
|
|