Author |
Message |
dina Brekeke Newbie
Joined: 03 Apr 2008 Posts: 2
|
Posted: Fri Apr 04, 2008 4:05 pm Post subject: Newbie need to configure berkeke sip server with IPBX |
|
|
1. Brekeke Product Name and version: SIP server 2.2
2. Java version: jre 1.6 update 5
3. OS type and the version: windows XP professional
4. UA (phone), gateway or other hardware/software involved: IPbx Alcatel OmniPCX
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem: I'm a newbie and I dont know how to configure my sip server to route alcatel calls to a speech server (URI like sip:555@192.168.30.10)
tha alcatel Ipbx is configured and detect the SIP server , but on the SIP server , I dont know how I have to proceed ??
I tried to configure a dial plan but that did not worked cause I'm not sure what I have to put in matching patterns and deploy pattern
can someone explain me the steps
Any help w'll really be appreciated .
thansk . |
|
Back to top |
|
taitan Brekeke Master Guru
Joined: 15 Mar 2008 Posts: 237
|
Posted: Sat Apr 05, 2008 7:23 pm Post subject: |
|
|
Hi dina,,
Try the DialPlan below.
Matching Patterns | $request = ^INVITE $addr = <ALCATEL_IP_ADDRESS> To = sip:9(.+)@
| Deploy Patterns | To = sip:%1@<SPEECH_SERVER_IP_ADDRESS>
|
All of prefix-9 calls from the alcatel will be routed to the speech server.
For example. if you dial 9555 at the alcatel side, the SIP Server forwards a call to sip:555@<SPEECH_SERVER_IP_ADDRESS>.
If the speech server accepts TCP only, you need to add "$transport = TCP" in the Deploy Patterns.
Let's try. |
|
Back to top |
|
|