Author |
Message |
peizhebest Brekeke Newbie
Joined: 24 Apr 2008 Posts: 2
|
Posted: Thu Apr 24, 2008 2:00 am Post subject: Brekeke SIP Server don`t feedback ACK to SIP Trunk Gateway |
|
|
1. Brekeke Product Name and version:Brekeke SIP Server 2.1.6.6
2. Java version:1.6.0_05
3. OS type and the version:Windows XP
4. UA (phone), gateway or other hardware/software involved:IAD and Trunk Gateway
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :Pattern 1 - all on one subnet
6. Your problem:
The SIP Trunk Gateway have E1 port connected to a PBX, and a WAN connected to the same subnet of IAD and SIP server.
There are lots of numbers in PBX, so SIP Trunk Gateway can not register with a only number.
So I add a dial plan indicated the calls to SIP Trunk. In Matching Patterns: $request=^INVITE;$registered=false; In Deploy Patterns:$target=trunk_ip. So that the registered IADs will make calls to each other freely and IAD users can make a call to PBX users.
But I found that the SIP Server doesn`t reply ACK to the 200 OK of SIP Trunk. So the talk will break after 30 seconds.
Could you help me? |
|
Back to top |
|
Haddas Brekeke Guru
Joined: 17 Jan 2008 Posts: 170
|
Posted: Thu Apr 24, 2008 10:35 am Post subject: |
|
|
Hi
Did you read the document carefully? I think you need to modify your DialPlan rule. For example, you should add "To" definition in your Deploy Patterns.
Matching Patterns | $request = ^INVITE $registered = false To = sip:(.+)@
| Deploy Patterns | To = %1@target=trunk_ip
|
|
|
Back to top |
|
peizhebest Brekeke Newbie
Joined: 24 Apr 2008 Posts: 2
|
Posted: Thu Apr 24, 2008 7:49 pm Post subject: |
|
|
Now it works.
Thanks a lot! |
|
Back to top |
|
|