Author |
Message |
pltec Brekeke Talented
Joined: 04 Nov 2005 Posts: 52
|
Posted: Fri Jun 13, 2008 1:49 pm Post subject: problem to create a ARS |
|
|
1. Brekeke Product Name and version:PBX 2.1.6.6
2. Java version: 6
3. OS type and the version: Slackware 12.0
4. UA (phone), gateway or other hardware/software involved: IP phne grandstrean and Quintum
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem:
My problem is in create a ARS that I dont needed to make use 9 ou 0, I want to make a direct call for to pstn and use a ramal to...
my ARS is wrong
matching deploy
sip:([1-6]{8}.+)@ sip:$1@192.168.10.8
when I call to ramal is ok... but when I call to psnt using this ARS the pbx report to me a 404 error
my ramal use 4 digits
and a need that all number betwen 1 and 6 go to 192.168.10.8
someone can help me? |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Fri Jun 13, 2008 2:57 pm Post subject: |
|
|
Did you try
matching
sip:([1-6]{8})@
Deploy
sip:$1@192.168.10.8 |
|
Back to top |
|
pltec Brekeke Talented
Joined: 04 Nov 2005 Posts: 52
|
Posted: Mon Jun 16, 2008 4:48 am Post subject: |
|
|
It did not work! |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Mon Jun 16, 2008 11:23 am Post subject: |
|
|
Are you going to dial to 192.168.10.8 with the number which is only include numbers between 1 and 6 and total digits is 8? or the total digits is at least 8?
if total is at least 8 digists, the matching pattern is
"To: sip:([1-6]{8,})@"
By the way the ARS rules above is put in the "To" part of matching and deploy patterns. |
|
Back to top |
|
pltec Brekeke Talented
Joined: 04 Nov 2005 Posts: 52
|
Posted: Mon Jun 16, 2008 12:35 pm Post subject: |
|
|
problem solved
sip:([1-6])(.{7})@
sip:$1$2@192.168.10.8
Thanks & Best Regards |
|
Back to top |
|
|