Author |
Message |
amatteo78 Brekeke Junior Member
Joined: 11 Jul 2008 Posts: 6
|
Posted: Wed Jul 16, 2008 6:14 am Post subject: trixbox + bss |
|
|
1. Brekeke Product Name and version: 2.1.6.6
2. Java version: 5.5
3. OS type and the version: Linux Debian
4. UA (phone), gateway or other hardware/software involved:
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem:
Hi,
I setup fine bss, I create some user and pass, I active option registration=yes so every need register to call, and all work.
Some my customer have trixbox in your office, they create a trunk to my bss but our trixbox not register.
How I can connect trixbox to my bss to received/send calls ??
Bye
Matteo |
|
Back to top |
|
Laurie Brekeke Master Guru
Joined: 07 Jan 2008 Posts: 242
|
Posted: Wed Jul 16, 2008 10:39 am Post subject: |
|
|
Are you using an Authentication for REGISTER ?
If so.. your customers need to set valid username/password at their trixbox.. otherwise, you need to accept their IP address by the DialPlan.
Laurie |
|
Back to top |
|
amatteo78 Brekeke Junior Member
Joined: 11 Jul 2008 Posts: 6
|
Posted: Wed Jul 16, 2008 12:35 pm Post subject: |
|
|
Thank you to reply
yes, I use AUTH to register, but trixbox use valid account, but it not register... ?? why ?? |
|
Back to top |
|
Mohney Brekeke Talented
Joined: 20 Nov 2007 Posts: 79
|
Posted: Wed Jul 16, 2008 7:23 pm Post subject: |
|
|
I'm using trixbox as a Brekeke's client.
Did you add the same user information at the SIP Server's User Authentication page? |
|
Back to top |
|
amatteo78 Brekeke Junior Member
Joined: 11 Jul 2008 Posts: 6
|
Posted: Thu Jul 17, 2008 6:47 am Post subject: |
|
|
yes, I add username and password in BSS Auth page... |
|
Back to top |
|
Mohney Brekeke Talented
Joined: 20 Nov 2007 Posts: 79
|
Posted: Thu Jul 17, 2008 10:51 am Post subject: |
|
|
what kind of error response did the trixbox receive from the SIP Server? |
|
Back to top |
|
amatteo78 Brekeke Junior Member
Joined: 11 Jul 2008 Posts: 6
|
Posted: Thu Jul 17, 2008 12:58 pm Post subject: |
|
|
Hi,
I received 401 Unathorized user, but today I try with other Trixbox and it register fine. I don't know.....???
Can you send me how configure trunk setting page on trixbox to use with BSS ?? example how register string, inbound call, outbound call, and other....
Thank you
Matteo |
|
Back to top |
|
Mohney Brekeke Talented
Joined: 20 Nov 2007 Posts: 79
|
Posted: Fri Jul 18, 2008 10:23 am Post subject: |
|
|
It seems your Trixbox's problem.
Check the Trixbox's settings again.. |
|
Back to top |
|
|