| Author |
Message |
Cowpoke
Brekeke Newbie
Joined: 10 Aug 2008
Posts: 4
|
 Posted: Mon Aug 11, 2008 5:16 pm Post subject: Brekeke with a Grandstream GXP 2000 |
 |
|
1. Brekeke Product Name and version:
SIP-Server 2.1.6.6
2. Java version:
1.5.0_06
3. OS type and the version:
Windows XP (SP2)
4. UA (phone), gateway or other hardware/software involved:
Grandstream GXP2000
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
1 (Everything within LAN)
6. Your problem:
The Grandstream does not register with the SIP server.
I followed the Quickstart Guide, and re-traced my steps a few times -- success is eluding me.
I want to call from computer (x-lite) to UA (GXP 2000); x-lite is showing up as registered client, GXP 2000, again, is not. |
|
| Back to top |
|
taitan
Brekeke Master Guru
Joined: 15 Mar 2008
Posts: 237
|
| Posted: Tue Aug 12, 2008 12:08 am Post subject: |
|
|
| you need to check the phone's username and password. |
|
| Back to top |
|
Cowpoke
Brekeke Newbie
Joined: 10 Aug 2008
Posts: 4
|
| Posted: Tue Aug 12, 2008 7:05 pm Post subject: Grandstream GXP 2000 |
|
|
Username and password both check out fine...
 I can't figure this one out!
Is there a certain version of .Net I should be using? |
|
| Back to top |
|
Beenie
Brekeke Member
Joined: 28 Jul 2008
Posts: 10
|
| Posted: Wed Aug 13, 2008 12:05 am Post subject: |
|
|
Hi Cowpoke,
If you don't use the authentication at the SIP Server, can GXP 2000 make a register?
Thanks
Beenie |
|
| Back to top |
|
Cowpoke
Brekeke Newbie
Joined: 10 Aug 2008
Posts: 4
|
| Posted: Fri Aug 15, 2008 1:38 pm Post subject: |
|
|
The GXP2000 is configured - it works with my current VoIP provider. I am trying to configure an in-house network. I used the QuickStart guide - thinking it'd be a snap... ho hum...
I am on the verge of throwing in the towel on this! 
Cowpoke |
|
| Back to top |
|
Haddas
Brekeke Guru
Joined: 17 Jan 2008
Posts: 170
|
| Posted: Fri Aug 15, 2008 2:26 pm Post subject: |
|
|
Can you send a ping from the server PC to the GXP 2000?
Are you using a firewall on the server PC? |
|
| Back to top |
|
Cowpoke
Brekeke Newbie
Joined: 10 Aug 2008
Posts: 4
|
| Posted: Sat Aug 16, 2008 11:47 am Post subject: |
|
|
I can reach the GXP2K from the server PC. (That's how I generally configure it.) They are joined together at the same router. Pinging works fine too... I turned off all my anti-virus/firewalls (to eliminate them as causes).
My suspicion is that the problem is with the GXP2K configuration -- something is not set correctly.
Can I post my phone config to this board? Perhaps you (someone) can review the config and identify what is incorrect in short order...?
Thanks!
Cowpoke |
|
| Back to top |
|
james
Brekeke Master Guru
Joined: 10 Dec 2007
Posts: 494
|
| Posted: Sat Aug 16, 2008 7:36 pm Post subject: |
|
|
Hi Cowpoke,
My company is using several GXP2000 phones and they are working well.
Paste your phone's settings here. I can check it out.
also, let me know the firmware's version. |
|
| Back to top |
|
|
