Brekeke Forum Index » Brekeke PBX Forum

Post new topic   Reply to topic
DTMF tones are not carry-out by Quintum Gateway
Author Message
juanmanuel
Brekeke Guru


Joined: 04 Mar 2009
Posts: 107
Location: Medellin,Colombia

PostPosted: Fri Mar 06, 2009 8:21 am    Post subject: DTMF tones are not carry-out by Quintum Gateway Reply with quote

1. Brekeke Product Name and version: Brekeke PBX 2.2.6.2

2. Java version:

3. OS type and the version: Windows Vista Bussines

4. UA (phone), gateway or other hardware/software involved:Quintum ASM400

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :Pattern2

6. Your problem:

The DTMF tones are not carried-out when a PSTN call is connected thru the Quintum ASM400 Gateway, I have configured the 3 ways Quintum does: RFC 2833, In Band Tones, SIP-INFO, also I have set RTP Relay "on" an PBX configuration and at SIP configuration of SIP Server, I have configured "no" at Block SIP Info in ARS defined for the gateway. I see at same ARS a field DTMF but the user Guide does not give any infornation about use it.

Other ponit is that one incoming call is connected the DTMF tones are carried-in to the PBX Auto Attendant.

I am very new in Brekeke PBX so I ask some body knows how to do that help me.

Thanks
Juan Acevedo
Medellin, Colombia
email: consultorit@umi.com.co

_________________
Juan Manuel Acevedo
Medellin, Colombia
email:jacevedo@e-global.com.co
Back to top
View user's profile Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Brekeke Forum Index » Brekeke PBX Forum All times are GMT - 7 Hours
Page 1 of 1