Brekeke Forum Index » Brekeke SIP Server Forum

Post new topic   Reply to topic
Problems BSS with RadiusCat
Author Message
soylo
Brekeke Talented


Joined: 30 Mar 2005
Posts: 59

PostPosted: Fri Mar 27, 2009 9:31 pm    Post subject: Problems BSS with RadiusCat Reply with quote

1. Brekeke Product Name and version:2.2.6.2

2. Java version: 5

3. OS type and the version: Windows 2003

4. UA (phone), gateway or other hardware/software involved: Linksys PAP

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html : Pattern 9

6. Your problem: We are using BSS with licensed Radius Cat. At First 120 telephones register and authentication and accounting very well with RadiusCat. But, little by little some telephones unregister without cause and I have to restart Linksys PAP2 to register again. RadiusCat is installed in other server on the same LAN than BSS, UAs are in Internet.

We are using plug-in auth from Brekeke.

If not authenticate with RadiusCat BSS register very well.

Soylo
Back to top
View user's profile
taitan
Brekeke Master Guru


Joined: 15 Mar 2008
Posts: 237

PostPosted: Sun Mar 29, 2009 12:17 am    Post subject: Reply with quote

Which edition of Brekeke SIP Server are you using?

Do you have any error message at RadiusCat ?
Back to top
View user's profile
soylo
Brekeke Talented


Joined: 30 Mar 2005
Posts: 59

PostPosted: Mon Mar 30, 2009 10:57 am    Post subject: Reply with quote

taitan wrote:
Which edition of Brekeke SIP Server are you using?

We are using BSS Estandar edition v.2.2.6.2

Do you have any error message at RadiusCat ?


Which edition of Brekeke SIP Server are you using?

We are using BSS Estandar edition v.2.2.6.2

Do you have any error message at RadiusCat ?[/

No, any error messege.
I ran wireshark on bss I see that many request have not sent to RadiusCat.
Back to top
View user's profile
Harold
Brekeke Master Guru


Joined: 21 Sep 2008
Posts: 285
Location: Japan

PostPosted: Tue Mar 31, 2009 12:40 am    Post subject: Reply with quote

Write the following in Configuration > Advanced page.

net.registrar.adjust.expires=3600
Back to top
View user's profile
Display posts from previous:   
Post new topic   Reply to topic    Brekeke Forum Index » Brekeke SIP Server Forum All times are GMT - 7 Hours
Page 1 of 1