Author |
Message |
soylo Brekeke Talented
Joined: 30 Mar 2005 Posts: 59
|
Posted: Fri Mar 27, 2009 9:31 pm Post subject: Problems BSS with RadiusCat |
|
|
1. Brekeke Product Name and version:2.2.6.2
2. Java version: 5
3. OS type and the version: Windows 2003
4. UA (phone), gateway or other hardware/software involved: Linksys PAP
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html : Pattern 9
6. Your problem: We are using BSS with licensed Radius Cat. At First 120 telephones register and authentication and accounting very well with RadiusCat. But, little by little some telephones unregister without cause and I have to restart Linksys PAP2 to register again. RadiusCat is installed in other server on the same LAN than BSS, UAs are in Internet.
We are using plug-in auth from Brekeke.
If not authenticate with RadiusCat BSS register very well.
Soylo |
|
Back to top |
|
taitan Brekeke Master Guru
Joined: 15 Mar 2008 Posts: 237
|
Posted: Sun Mar 29, 2009 12:17 am Post subject: |
|
|
Which edition of Brekeke SIP Server are you using?
Do you have any error message at RadiusCat ? |
|
Back to top |
|
soylo Brekeke Talented
Joined: 30 Mar 2005 Posts: 59
|
Posted: Mon Mar 30, 2009 10:57 am Post subject: |
|
|
taitan wrote: |
Which edition of Brekeke SIP Server are you using?
We are using BSS Estandar edition v.2.2.6.2
Do you have any error message at RadiusCat ? |
Which edition of Brekeke SIP Server are you using?
We are using BSS Estandar edition v.2.2.6.2
Do you have any error message at RadiusCat ?[/
No, any error messege.
I ran wireshark on bss I see that many request have not sent to RadiusCat. |
|
Back to top |
|
Harold Brekeke Master Guru
Joined: 21 Sep 2008 Posts: 287
Location: Japan
|
Posted: Tue Mar 31, 2009 12:40 am Post subject: |
|
|
Write the following in Configuration > Advanced page.
net.registrar.adjust.expires=3600 |
|
Back to top |
|
|