Author |
Message |
jwiseman01 Brekeke Newbie
Joined: 25 May 2010 Posts: 4
Location: Nashville
|
Posted: Thu May 27, 2010 8:37 pm Post subject: Integrating Nortel CS1000 & Rauland Responder 5 via Brek |
|
|
1. Brekeke Product Name and version: SIP Server - version 2.4.4.8/286
2. Java version:
3. OS type and the version: XP
4. UA (phone), gateway or other hardware/software involved: Nortel CS1000
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html : 1
6. Your problem:
Looking for help on connecting a Nortel CS1000 to the Brekeke SIP Server along with a Rauland Responder 5 system.
I'm able to get a phone on the Nortel PBX to talk to an X-Lite SIP softphone connected to the Brekeke - by configuring a domain on the Brekeke that is the same as the Nortel CS1000 - and putting the soft phone in that domain.
But the Rauland doesn't appear to use a domain (or haven't seen it can) so the endpoints register to the Brekeke without a domain. How do I get these 2 to talk?
The endpoints associated with the Rauland seem to be able to call the Nortel endpoints - cause they just follow the dial plan rules. But the reverse (Nortel calling Rauland devices) seem to come into the Brekeke with the domain information associated with the Nortel - which of course the Brekeke doesn't know what to do with, so it responds with a 404 Not Found.
Ideas or suggestions? _________________ Thanks!!
Jeff |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Fri May 28, 2010 9:36 am Post subject: |
|
|
if not use domain on brekeke, can you make calls between rauland and nortel on both direction?
what dial plans created on brekeke? |
|
Back to top |
|
Mike Support Team
Joined: 07 Mar 2005 Posts: 733
Location: Sunny San Mateo
|
Posted: Fri May 28, 2010 12:54 pm Post subject: |
|
|
Hi Jeff,
Are you a Rauland-Borg's reseller?
If so, you can get direct support from Brekeke's support team.
Please contact support@brekeke.com . |
|
Back to top |
|
james Brekeke Master Guru
Joined: 10 Dec 2007 Posts: 497
|
Posted: Tue Jun 01, 2010 4:08 pm Post subject: |
|
|
which edition of SIP Server are you using?
paste your current Dialplan rules here. |
|
Back to top |
|
jwiseman01 Brekeke Newbie
Joined: 25 May 2010 Posts: 4
Location: Nashville
|
Posted: Tue Jun 01, 2010 5:29 pm Post subject: |
|
|
I am using version: 2.4.4.8/286
Here are my dialing plan rules:
Rule 1: From CS1K
Matching Patterns | $request = ^invite to = sip:(.+);phone-context
|
Deploy Patterns | To = sip:%1@ $auth = false &net.sip.replacesdp.multipart = true
|
Rule 2: To CS1K
(note this way works fine)
Matching:
$request=^INVITE
To=sip:(.+)@
To=sip:7(.+)@
Deploy Patterns | to = sip:%1@47.185.51.110
|
I have a sniffer trace showing the request come in with the invite of:
<sip:2004;phone-context=cdp.udp@nash.lab;user=phone>.
This call fails - but if I change the domain name on the CS1K side to the IP address of the Brekeke SIP server,
<sip:2004;phone-context=cdp.udp@10.1.1.116;user=phone>
the call is successful.
I recently saw a new post to the wiki showing the dialing plan, but it does not seem to work.
How do I ignore the part of the invite that has @nash.lab or replace it with @10.1.1.116?
Thanks for the help! _________________ Thanks!!
Jeff |
|
Back to top |
|
james Brekeke Master Guru
Joined: 10 Dec 2007 Posts: 497
|
Posted: Fri Jun 04, 2010 10:13 am Post subject: |
|
|
Ok..
The $request definition in "Rule 1: From CS1K"..
$request=^invite should be $request=^INVITE .
If the issue still persists, add the domainname "nash.lab" in the hosts file.
The hosts file is "%SystemRoot%\system32\drivers\etc\hosts". |
|
Back to top |
|
jwiseman01 Brekeke Newbie
Joined: 25 May 2010 Posts: 4
Location: Nashville
|
Posted: Fri Jun 04, 2010 3:22 pm Post subject: |
|
|
Thank you, Thank you, THANK YOU!!!
The case sensitive piece did the trick.
I'm getting a delay though in the ringing from the CS1K to a SIP endpoint - I see a TCP session trying to get established before it sends the SIP invite. But the CS1K sends a RST 3 or 4 times before it is established - then once it is, the Invite is sent and everything works. I've got a sniffer trace of it - just don't know why it's doing that.
If you have any thoughts or would be nice enough to look at the sniffer trace, let me know. _________________ Thanks!!
Jeff |
|
Back to top |
|
james Brekeke Master Guru
Joined: 10 Dec 2007 Posts: 497
|
Posted: Mon Jun 07, 2010 1:57 pm Post subject: |
|
|
Does CS1K send INVITE over TCP??
If a SIP endpoint doesn't support TCP, add $transport=UDP in rule-1's Deploy pattern.
It converts the transport protocol to UDP. |
|
Back to top |
|
jwiseman01 Brekeke Newbie
Joined: 25 May 2010 Posts: 4
Location: Nashville
|
Posted: Mon Jun 07, 2010 3:45 pm Post subject: |
|
|
I got it resolved - it had something to do with the L2 switch I was using (Linksys). Moved everything to a different switch and voila - it's working fine.
So I believe I'm good to go.
One last question (at least for now) - what does the rule "&net.sip.replacesdp.multipart=true" do?
Just trying to figure out the logic of what is actually happening. _________________ Thanks!!
Jeff |
|
Back to top |
|
james Brekeke Master Guru
Joined: 10 Dec 2007 Posts: 497
|
Posted: Mon Jun 07, 2010 4:07 pm Post subject: |
|
|
With "&net.sip.replacesdp.multipart=true", the SIP Server converts CS1K's multipart-content to a single SDP-content.
Many of SIP clients including Rauland Responder can not accept a multipart-content. |
|
Back to top |
|
al.thewizard Brekeke Junior Member
Joined: 20 Aug 2009 Posts: 8
|
Posted: Mon May 09, 2011 7:47 am Post subject: |
|
|
Hi Jef,
can you please post or send by email the config part on the CS1000 ? and the related part on the SIP server ?
Thanks |
|
Back to top |
|
lakeview Brekeke Master Guru
Joined: 15 Nov 2007 Posts: 319
Location: Florida
|
|
Back to top |
|
bsworkman Brekeke Newbie
Joined: 17 Jan 2013 Posts: 3
Location: Pittsburgh, PA
|
Posted: Thu Jan 17, 2013 7:38 am Post subject: |
|
|
Would anybody happen to have information on the programming on the CS1000 side to setup the SIP trunk? I see the information here on the Brekeke side and have a fair understanding of how the dial plans need to be deployed, however the Nortel programming is a complete mystery.
I know this is an old topic, but it fits our ultimate goal of making the Responder 5 talk to Nortel via Brekeke.
Thanks,
-Brian. |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
|
Back to top |
|
davi Brekeke Addict
Joined: 26 Jan 2011 Posts: 34
|
Posted: Thu Jan 17, 2013 1:18 pm Post subject: |
|
|
Brian,
Which version of CS1000/SIP trunk are you using?
Are you using Avaya SES too?
Nortel CS1000 was working well without issue but it seems Avaya did some modifications.. |
|
Back to top |
|
ambrosio Brekeke Master Guru
Joined: 27 Mar 2008 Posts: 215
|
Posted: Thu Jan 17, 2013 6:42 pm Post subject: |
|
|
Add Brekeke SIP Server as a Gateway Endpoint in NRS (Network Routing Service) Manager.
Set the Brekeke SIP Server's IP address in the [Static endpoint address] field there. |
|
Back to top |
|
|