ARS Issue

damatta · Posted: Fri May 06, 2011 7:57 pm Post subject: ARS Issue

1. Brekeke Product Name and version: Brekeke PBX, Version 2.2.6.2 , Pro

2. Java version: 1.5.0_14

3. OS type and the version: Windows 2003

4. UA (phone), gateway or other hardware/software involved: eyeBeam

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html : 9

6. Your problem: cannot set up 'Next route on failure' properly. Besides destination proxy returns SIP error code 603 (Declined), PBX keep sending invites for aprox. 10 secs. 'till pass to the following route. Error codes are set like '400-606'. Any help deeply appreciated.

hope · Brekeke Master Guru Joined: 15 Jan 2008 Posts: 862

is there any response for the invite from brekeke within 10 seconds?
if not, you can set "response timeout(ms)" to a short time.

damatta · Posted: Mon May 09, 2011 11:23 am Post subject:

Yes, there is a response from destination proxy (SIP error: 603). Tried to change Response timeout ( to 1000ms) but same result...

hope · Brekeke Master Guru Joined: 15 Jan 2008 Posts: 862

what is your ARS rules for failover like?
are both pattern-out for the call (primary and failover) in the same ARS rule?
maybe you need to update pbx to latest version.

damatta · Posted: Tue May 10, 2011 12:03 pm Post subject:

Please check below

Next route on failure: Yes
Response timeout (ms): -1
Recovery time (ms) : 0
Error codes : 400-606
Disable on failure : this pattern