DNS SRV issues with brekeke server

ccitechs · Brekeke Newbie Joined: 15 Dec 2011 Posts: 2

1. Brekeke Product Name and version:
brekeke sip server Version 2.4.8.6 Advanced
2. Java version:

3. OS type and the version:
CENTOS 5.7
4. UA (phone), gateway or other hardware/software involved:

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :

6. Your problem:
i'm sending to a DNS-SRV name but according to the carrier its not sending to the priority their SRV record is saying. they have 6 different ip address but i will send to one ip until the DNS refreshes and its not load blanacing between ip's
i'm assuming i haven't set something up correctly?
thanks
Nathan

Inhelacoone · Posted: Thu Dec 15, 2011 12:28 pm Post subject: DNS SRV issues with

I confirm. It was and with me. Let's discuss this question.

ccitechs · Brekeke Newbie Joined: 15 Dec 2011 Posts: 2

i don't understand your reply? i'm open to discussing the question.
i'm having DNS SRV issues. the carrier is reporting that i'm sending to an A rrcord in the DNS settings and not to the SRV part of the record. is this a configuration issue?

nathan

Mcgee · Brekeke Member Joined: 27 Mar 2008 Posts: 18

Hi

At first, are you sure that DNS SRV records are correctly defined in the DNS server?

Can you send a ping from the SIP server's PC to the DNS server's IP address?

Do you have "net.dns.srv=false" or "net.dns.srv=off" in your SIP server settings?
If yes, remove it because "false" or "off" setting disables the DNS-SRV.

Otherwise, check the DNS settings again.
For DNS based load-blanacing, "priority" and "weight" must be tuned.