Configuring server to authorise a LAN IP to receive sip call

supbrekeke · Brekeke Newbie Joined: 18 Jun 2012 Posts: 2

1. Brekeke Product Name and version: Brekeke PBX

2. Java version:

3. OS type and the version: Win Server 2003

4. UA (phone), gateway or other hardware/software involved:

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :

6. Your problem: How do we configure Brekeke PBX server to authorise a LAN IP to receive sip call?

Tata · Brekeke Master Guru Joined: 27 Jan 2008 Posts: 223

Use $addr variable at DialPlan's Matching Patterns.

For example, if you want to accept 192.168.0.1 only.
$addr = ^192.168.0.1$

Refer to the document for more details.

supbrekeke · Brekeke Newbie Joined: 18 Jun 2012 Posts: 2

Thanks Tata.

Kindly point out which document we should refer to for further guidance on adding $addr = ^192.168.0.1$ into dial Matching Patterns.

Cheers!

Tata · Brekeke Master Guru Joined: 27 Jan 2008 Posts: 223

The following wiki topic will help.
http://wiki.brekeke.com/wiki/Authenticate-caller-by-IP-address

Tata · Brekeke Master Guru Joined: 27 Jan 2008 Posts: 223

There is the definition of "$addr" in the Brekeke SIP Server's Admin Guide. The section is "4.3.2 Reference of Conditional Functions"
http://www.brekeke-sip.com/download/bss/v3_x/bssv3_admin_en.pdf

Also, there are some examples in the DialPlan tutorial.
http://www.brekeke-sip.com/download/bss/v2_x/bss_tutorial_dialplan_en.pdf