Author |
Message |
tissa Brekeke Addict
Joined: 18 Nov 2010 Posts: 39
Location: sri lanka
|
Posted: Wed May 18, 2011 5:32 am Post subject: please advice |
|
|
Hi,
Let me explain it again clearly.
My brekeke sip server is running in france.
Quintum gateway is located in india and it is registered with pbx server in france
The Quintum voip gateway is only using for call termination to india.
So, pap2 users registered in pbx server can get call to india perfectly.
pap2 users dialing format : 00 91 123456789 #
Pbx server Dial plan for quintum is as follows;
Maching Pattern
$request=^INVITE
To=sip:(.+)@
Deploy Patterns | To = sip:%1@quintum_Ip_Address
|
However, My problem is , since my Quintum gateway (registered with pbx server)is only configured to terminate
calls to india, pap2 users who need to dial to other countries like singapore(other than India) are unable to get
their calls.
Therefore,in order to call other countries an ITSP account must be registered with pbx server.
Please kindly advise me on required ARS settings and Dial Plans to register ITSP account with pbx server.
ITSP Account Details:
user id-tissa
password-123456
itsp proxr server address; sip.voicetrading.com
Thanks in Advance
Tissa |
|
Back to top |
|
tissa Brekeke Addict
Joined: 18 Nov 2010 Posts: 39
Location: sri lanka
|
Posted: Thu May 19, 2011 4:48 pm Post subject: pls advice |
|
|
Posted: Wed May 18, 2011 5:32 am Post subject: please advice
--------------------------------------------------------------------------------
Hi,
Let me explain it again clearly.
My brekeke sip server is running in france.
Quintum gateway is located in india and it is registered with pbx server in france
The Quintum voip gateway is only using for call termination to india.
So, pap2 users registered in pbx server can get call to india perfectly.
pap2 users dialing format : 00 91 123456789 #
Pbx server Dial plan for quintum is as follows;
Maching Pattern
$request=^INVITE
To=sip:(.+)@
Deploy Patterns | To = sip:%1@quintum_Ip_Address
|
However, My problem is , since my Quintum gateway (registered with pbx server)is only configured to terminate
calls to india, pap2 users who need to dial to other countries like singapore(other than India) are unable to get
their calls.
Therefore,in order to call other countries an ITSP account must be registered with pbx server.
Please kindly advise me on required ARS settings and Dial Plans to register ITSP account with pbx server.
ITSP Account Details:
user id-tissa
password-123456
itsp proxr server address; sip.voicetrading.com
Thanks in Advance
Tissa |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
|
Back to top |
|
tissa Brekeke Addict
Joined: 18 Nov 2010 Posts: 39
Location: sri lanka
|
Posted: Fri Jun 17, 2011 9:12 am Post subject: dial plan |
|
|
Posts: 1
My New Gateway - GRANDSTREAM 4108 GXW 4108
Hi.
When a sip user attempt to dial a number which is in international format (example: 00-94-11-2845300 ) call is getting connected to pstn but does'nt reach number. How ever,when it dials a number whit out international prefix (example: 2845300) call is being reached successfully.Please kindly advise me on this with neccerssary dial plan.
thanks.
tissa
ARS
matching
sip:([0-9]{7,25})@
deploy:
sip:$1@Grandstream 4108_IP
Matching Patterns | $request = ^INVITE To = sip:(00.+)@
| Deploy Patterns | To = sip:%1@Grandstream 4108_gw_ip_address
|
|
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Tue Jun 21, 2011 10:08 am Post subject: |
|
|
Matching Patterns | $request = ^INVITE To = sip:009411(.+)@
| Deploy Patterns | To = sip:%1@Grandstream 4108_gw_ip_address
|
|
|
Back to top |
|
tissa Brekeke Addict
Joined: 18 Nov 2010 Posts: 39
Location: sri lanka
|
Posted: Mon Jul 11, 2011 8:15 am Post subject: Reply |
|
|
Greetings!
I must mention the following again for your information.
When a sip user attempt to dial a number which is in international format (example: 00-94-11-2845300 ), call is getting connected to pstn but it doesn't reach the number. How ever,when it dials a number without a international prefix (example: 2845300) call is being reached successfully.
Now my Questions are as follows
1. I want to know the settings for dialing the international call without PBX server dial plane.
Can please kindly advise on this?
2. Also, if Granstream 4180 gateway requires a dial plan to Granstream 4180 gateway, I would also like to have the dial plane for it.
Thanks,
Tissa |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Mon Jul 11, 2011 1:36 pm Post subject: |
|
|
when making call with prefix 009411 check this call detail from pbx/call status if correct ARS rule is applied to the call
and at same time check if any changes for dialing number made from dial plan applied to call from sip server/active sessions about call.
if some unexpected changes made to call dialing number, change the ARS or dial plan. |
|
Back to top |
|
tissa Brekeke Addict
Joined: 18 Nov 2010 Posts: 39
Location: sri lanka
|
Posted: Sat Jul 16, 2011 4:49 am Post subject: Please Advice |
|
|
Hi,
Please find below for results I obtained.
Also I retreieved the following for ARS pattern
ARS matching
sip:([0-9]{7,25})@
deploy:
sip:$1@Grandstream_ 4108_IP
- active session/pbx call status when dialed with 009411
X-SID 28
From-uri sip:1599@192.168.1.15:5060
From-ip 127.0.0.1:15062 (UDP)
From-if 127.0.0.1:5060
To-uri sip:0094112790340@192.168.1.3
To-ip 192.168.1.3 (UDP)
To-if 192.168.1.15:5060
Call-ID ad8d8be5-7f93e65e-5767b6cc-ed52b298@192.168.1.15
rule From PBX 1
plug-in InviteSession
sip-packet-total 6
listen-port 5060
session-status Talking
time-inviting Fri Jul 15 16:33:26 IST 2011
time-talking Fri Jul 15 16:33:34 IST 2011
length-talking 00:00:03
rtp-relay off
Status
ID 113000000006
Status CALLING
Call Park
Conference
Start Fri, Jul.15, 2011 04:35:29 PM
UAs
User ARS URI Connected
1599 101 <sip:1599@192.168.1.15> Disconnect
0094112790340 101 <sip:0094112790340@192.168.1.3> Disconnect
-active session/pbx call status when dialed without 009411
Status
ID 113000000007
Status TALKING
Call Park
Conference
Start Fri, Jul.15, 2011 04:37:08 PM
UAs
User ARS URI Connected
1599 101 <sip:1599@192.168.1.15> 04:37:11 PM Disconnect
2790340 101 <sip:2790340@192.168.1.3> 04:37:11 PM Disconnect
EX-SID 54
From-uri sip:1599@192.168.1.15:5060
From-ip 127.0.0.1:15062 (UDP)
From-if 127.0.0.1:5060
To-uri sip:2790340@192.168.1.3
To-ip 192.168.1.3 (UDP)
To-if 192.168.1.15:5060
Call-ID 257e3f68-1f785b7-c54ec713-6fb651f1@192.168.1.15
rule From PBX 1
plug-in InviteSession
sip-packet-total 6
listen-port 5060
session-status Talking
time-inviting Fri Jul 15 16:38:29 IST 2011
time-talking Fri Jul 15 16:38:31 IST 2011
length-talking 00:00:01
rtp-relay off
Please advise?
Thanks,
Tissa |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Mon Jul 18, 2011 10:57 am Post subject: |
|
|
are the same ARS rule name shown in pbx side / call status page details about call when dial with/without 009411?
if yes, then create another ARS pattern-OUT with smaller number in priority field than the current one and set as
matching:
To: sip:009411([0-9]{7,})@
deploy:
To: $1@Grandstream_ 4108_IP |
|
Back to top |
|
tissa Brekeke Addict
Joined: 18 Nov 2010 Posts: 39
Location: sri lanka
|
Posted: Tue Jul 19, 2011 7:49 am Post subject: Please Advice |
|
|
hi,
thank for your repply me. Call reached successfully for your settings. Another problem having is call is not reached when dialed differant area code (00 94 31 2256789) or a mobile number (00 94 77 1234567)
Kindly Advise?
thanks |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Tue Jul 19, 2011 10:00 am Post subject: |
|
|
change the ars rule as below
matching:
To: sip:0094(11|31|77)([0-9]{7,})@
deploy:
To: sip:$2@Grandstream_ 4108_IP
sip:0094(11|31|77) means 0094 followed by 11 or 31 or 77
$2 in deploy means the content in second parenthesis in matching To filed, which is ([0-9]{7,}) part
You'd better learn how to write Regular expression.
http://wiki.brekeke.com/wiki/buffer-in-the-dial-plan
it is similar in ARS rule, but use $ instead of %
http://en.wikipedia.org/wiki/Regular_expression |
|
Back to top |
|
tissa Brekeke Addict
Joined: 18 Nov 2010 Posts: 39
Location: sri lanka
|
Posted: Mon Jul 25, 2011 9:01 am Post subject: please advise |
|
|
hi,
can you send me ARS settings for 10 digit subscriber numbers.
my current ARS settings
ARS
matching
sip:([0-9]{7,25})@
deploy:
sip:$1@Grandstream 4108_IP
thanks |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
|
Back to top |
|
tissa Brekeke Addict
Joined: 18 Nov 2010 Posts: 39
Location: sri lanka
|
Posted: Thu Apr 12, 2012 6:17 am Post subject: please advise |
|
|
How to give DID Number to ARS? |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Thu Apr 12, 2012 11:02 am Post subject: |
|
|
do you need on inbound calls or outbound calls?
give some example about your question is better. |
|
Back to top |
|
tissa Brekeke Addict
Joined: 18 Nov 2010 Posts: 39
Location: sri lanka
|
Posted: Fri Apr 13, 2012 6:09 am Post subject: Please Advice |
|
|
What I meant to say is
- I have 2 Quintum gateways configured to Brekeke PBX server for call originate and termination.
- So, I'm using DID number for calling card user to access.
What I want to know is how to connect to originate gateway without IP PBX.
I hope this will elaborate you more on my inquiry.
Thanks in Advance,
Tissa |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Fri Apr 13, 2012 12:29 pm Post subject: |
|
|
who issue the DID number?
is there any setting at DID provider side to point each DID number to gateway
and set gateway to send calls to Brekeke PBX. |
|
Back to top |
|
tissa Brekeke Addict
Joined: 18 Nov 2010 Posts: 39
Location: sri lanka
|
Posted: Mon Aug 27, 2012 5:33 am Post subject: DID to ARS |
|
|
how to give DID Number to ARS. as Inbound calls.My DID Provider is DIDWW.Provider Settings are
[46.19.209.10]
host=46.19.209.10
dtmfmode=rfc2833
dtmf=rfc2833
type=peer
context=from-didww
insecure=very
nat=never
allow=all
[46.19.209.11]
host=46.19.209.11
dtmfmode=rfc2833
dtmf=rfc2833
type=peer
context=from-didww
insecure=very
nat=never
allow=all
[46.19.209.12]
host=46.19.209.12
dtmfmode=rfc2833
dtmf=rfc2833
type=peer
context=from-didww
insecure=very
nat=never
allow=all
[46.19.209.13]
host=46.19.209.13
dtmfmode=rfc2833
dtmf=rfc2833
type=peer
context=from-didww
insecure=very
nat=never
allow=all
[46.19.209.14]
host=46.19.209.14
dtmfmode=rfc2833
dtmf=rfc2833
type=peer
context=from-didww
insecure=very
nat=never
allow=all
[46.19.209.15]
host=46.19.209.15
dtmfmode=rfc2833
dtmf=rfc2833
type=peer
context=from-didww
insecure=very
nat=never
allow=all
[46.19.209.75]
host=46.19.209.75
dtmfmode=rfc2833
dtmf=rfc2833
type=peer
context=from-didww
insecure=very
nat=never
allow=all
[46.19.209.76]
host=46.19.209.76
dtmfmode=rfc2833
dtmf=rfc2833
type=peer
context=from-didww
insecure=very
nat=never
allow=all
[46.19.209.77]
host=46.19.209.77
dtmfmode=rfc2833
dtmf=rfc2833
type=peer
context=from-didww
insecure=very
nat=never
allow=all
[46.19.209.78]
host=46.19.209.78
dtmfmode=rfc2833
dtmf=rfc2833
type=peer
context=from-didww
insecure=very
nat=never
allow=all
[46.19.209.79]
host=46.19.209.79
dtmfmode=rfc2833
dtmf=rfc2833
type=peer
context=from-didww
insecure=very
nat=never
allow=all
[46.19.209.80]
host=46.19.209.80
dtmfmode=rfc2833
dtmf=rfc2833
type=peer
context=from-didww
insecure=very
nat=never
allow=all
[46.19.210.10]
host=46.19.210.10
dtmfmode=rfc2833
dtmf=rfc2833
type=peer
context=from-didww
insecure=very
nat=never
allow=all
[46.19.210.11]
host=46.19.210.11
dtmfmode=rfc2833
dtmf=rfc2833
type=peer
context=from-didww
insecure=very
nat=never
allow=all
[46.19.210.12]
host=46.19.210.12
dtmfmode=rfc2833
dtmf=rfc2833
type=peer
context=from-didww
insecure=very
nat=never
allow=all
[46.19.210.13]
host=46.19.210.13
dtmfmode=rfc2833
dtmf=rfc2833
type=peer
context=from-didww
insecure=very
nat=never
allow=all
[46.19.210.14]
host=46.19.210.14
dtmfmode=rfc2833
dtmf=rfc2833
type=peer
context=from-didww
insecure=very
nat=never
allow=all
[46.19.210.15]
host=46.19.210.15
dtmfmode=rfc2833
dtmf=rfc2833
type=peer
context=from-didww
insecure=very
nat=never
allow=all
[46.19.210.75]
host=46.19.210.75
dtmfmode=rfc2833
dtmf=rfc2833
type=peer
context=from-didww
insecure=very
nat=never
allow=all
[46.19.210.76]
host=46.19.210.76
dtmfmode=rfc2833
dtmf=rfc2833
type=peer
context=from-didww
insecure=very
nat=never
allow=all
[46.19.210.77]
host=46.19.210.77
dtmfmode=rfc2833
dtmf=rfc2833
type=peer
context=from-didww
insecure=very
nat=never
allow=all
[46.19.210.78]
host=46.19.210.78
dtmfmode=rfc2833
dtmf=rfc2833
type=peer
context=from-didww
insecure=very
nat=never
allow=all
[46.19.210.79]
host=46.19.210.79
dtmfmode=rfc2833
dtmf=rfc2833
type=peer
context=from-didww
insecure=very
nat=never
allow=all
[46.19.210.80]
host=46.19.210.80
dtmfmode=rfc2833
dtmf=rfc2833
type=peer
context=from-didww
insecure=very
nat=never
allow=all
please advise me.
thank you |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Mon Aug 27, 2012 11:12 am Post subject: |
|
|
How many DID numbers do you need to set in ARS?
do you need to register to provider? |
|
Back to top |
|
tissa Brekeke Addict
Joined: 18 Nov 2010 Posts: 39
Location: sri lanka
|
Posted: Mon Aug 27, 2012 5:22 pm Post subject: DID number |
|
|
one number,yes i need register to provider |
|
Back to top |
|
tissa Brekeke Addict
Joined: 18 Nov 2010 Posts: 39
Location: sri lanka
|
Posted: Thu Aug 30, 2012 6:38 pm Post subject: DID REGISTER |
|
|
one number,yes i need register to provider
thanks |
|
Back to top |
|
tissa Brekeke Addict
Joined: 18 Nov 2010 Posts: 39
Location: sri lanka
|
Posted: Mon Sep 10, 2012 9:40 am Post subject: |
|
|
Hi,
Appreciate your quick reply on following;
When a call is made and hung up ,it takes few mins (3-4 mins) for session to get time out.So during that period no calls can be made.Since the time out period is bit long pls let me know sort out this problem?
Thanks |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Mon Sep 10, 2012 10:37 am Post subject: |
|
|
- what is call status shown from sip server side / Active sessions?
- is the call going through ARS or just call between two pbx users?
- no call can be made to/from the same pbx user or no call can be made from/to any user? |
|
Back to top |
|
tissa Brekeke Addict
Joined: 18 Nov 2010 Posts: 39
Location: sri lanka
|
Posted: Wed Oct 10, 2012 7:22 am Post subject: Accounting |
|
|
Hi All,
I have installed PBX version 3 . Can anyone pls let me know what are the accounting plug-ins required? I'm using Radius cat standard version,have used PBX Version 2 and configured accounting settings.However, it doesn't seems same settings working in PBX version 3.Please let me know if anything new plug-ins needs to be installed?
Thanks in Advance |
|
Back to top |
|
tissa Brekeke Addict
Joined: 18 Nov 2010 Posts: 39
Location: sri lanka
|
Posted: Wed Oct 17, 2012 10:07 am Post subject: RADIUSCAT ACCT |
|
|
Hi All,
I have installed PBX trial version 3 . Can anyone pls let me know what are the accounting
plug-ins required? I'm using Radius cat standard version,have used PBX trial Version 2 and
configured accounting settings.The plugin- I installed are :
radius.acctport = 1813
radius.radiushost = 192.168.2.7
radius.sharedsecret = thiline
net.usrdir.plugins=com.sample.radius.proxy.RadiusAuth
radius.authport = 1812
radius.acctport = 1813
radius.radiushost = 192.168.2.7
radius.sharedsecret = thiline
dial Plan
Matching Patterns | $request = ^INVITE
| Deploy Patterns | $session = com.sample.radius.proxy.RadiusAcct $continue = true
|
However, it doesn't seems same settings working in PBX version 3.Please let me know if
anything new plug-ins needs to be installed?
Thanks in Advance |
|
Back to top |
|
|