PBX v3 Message Waiting Indicator no working

[adrenaln]

1. Brekeke Product Name and Version: Brekeke PBX, Version 3.0.7.0

2. Java version: 1.6.0_17

3. OS type and the version: Windows Server 2003

4. UA (phone), gateway or other hardware/software involved: Cisco SPA 514G

5. Your problem: Hi there, I have just updated my OnDo v1 PBX
to v3.0.7.0, (clean install) and everything is running fantastic, except I have no MWI on the handsets. I have enabled the Message Waiting Indicator option in the PBX options. Is there something else that I am missing? No notify packets of any kind are being sent by the PBX to the handsets. Any help will be greatly appreciated! Thanks,

Dirk

[hope]

can the phone send subscribe of message to Brekeke PBX?
is the phone assigned to any pbx user extension?

[adrenaln]

Hi Hope,

The phone doesnt send a subscribe to the PBX, this is the same behaviour as with OnDo v1 PBX.
The phone/s are assigned to extn's.

I am wondering if perhaps the V.1 PBX sent MWI notify packets regardless of if a subscribe was received and V.3 is behaiving a bit stricter to the standard?

[voipwell.com]

Have you found a solution to this. Just discovered the same problem today myself. V2 used to manage the mwi with cisco phones but v3 appears not to in v 3.1.7.8. Cisco does not subscribe.

1.4.2.6 Beta (May 2, 2005)
- Supports MWI for the phones which don't send SUBSCRIBE

Did this get removed or are we missing where to turn it on. it used to be turned on in the pbx options.

Thanks

[voipwell.com]

Version 3 requires Cisco phones to subscribe for MWI.
To set this up fill out the following fields in the ext tab.
Mailbox ID: set to the Brekeke extension ie 1020
Voice Mail Server: The domain name or ip address of your pbx
Voice Mail Subscribe Interval: 1800

This will cause the Cisco SPA phone to subscribe to Brekeke for MWI
and work fine.

[hope]

next version Brekeke PBX v3.2 will support MWI without subscribe