Author |
Message |
tangwei Brekeke Newbie
Joined: 27 Nov 2014 Posts: 2
Location: shenzhen
|
Posted: Thu Nov 27, 2014 1:36 am Post subject: Register timeout if source is public IP. |
|
|
1. Brekeke Product Name and Version:
Brekeke SIP Server 3.3.8.1/379-7
2. Java version:
jre-7u71
3. OS type and the version:
Windows Server 2008 R2 Standard
4. UA (phone), gateway or other hardware/software involved:
Eyebeam 1.5.19.4 build 51814
5. Your problem:
Brekeke ip: 10.10.0.174, Router 58.250.168.3
if Eyebeam is from Lan, then Register OK.
but if Eyebeam from public, Register timeout. Run Wireshark, the Register Request have reached, but sipserver do nothing.
and I do not know how to set these params:
Interface address 1
Remote Address Pattern 1
Interface address 2
Remote Address Pattern 2
Auto interface discovery
External IP address pattern
Can you give me a sample.
Thanks. |
|
Back to top |
|
KentC Brekeke Guru
Joined: 09 Dec 2011 Posts: 108
Location: rw-rw-rw-
|
Posted: Thu Nov 27, 2014 9:59 am Post subject: |
|
|
Router 58.250.168.3
Interface address 1 = 58.250.168.3
Auto interface discovery = off
External IP address pattern = BLANK
You can also setup a STUN Server on your server and try using upper registration if you are trying to register to an ITSP.
Let us know if that helps you,
Thanks,
Kent C. |
|
Back to top |
|
tangwei Brekeke Newbie
Joined: 27 Nov 2014 Posts: 2
Location: shenzhen
|
Posted: Thu Nov 27, 2014 5:21 pm Post subject: |
|
|
It work very well, Thanks! _________________ shenzhen china. |
|
Back to top |
|
|