Author |
Message |
rsmithidgc Brekeke Member
Joined: 22 Mar 2016 Posts: 16
Location: mobile al
|
Posted: Tue Mar 22, 2016 7:41 am Post subject: Connectting Brekeke PBX to A Session Boarder Controller |
|
|
1. Brekeke Product Name and Version:Brekeke PBX, Version 3.5.3.3
2. Java version:
3. OS type and the version:Windows server 2012
4. UA (phone), gateway or other hardware/software involved: Blox SBC
5. Your problem: i am having trouble getting brekeke to send and receive calls from and to the sbc. |
|
Back to top |
|
Tata Brekeke Master Guru
Joined: 27 Jan 2008 Posts: 223
|
Posted: Tue Mar 22, 2016 9:15 am Post subject: |
|
|
Do you still have the problem if you don't use the SBC? |
|
Back to top |
|
rsmithidgc Brekeke Member
Joined: 22 Mar 2016 Posts: 16
Location: mobile al
|
Posted: Mon Mar 28, 2016 7:44 am Post subject: |
|
|
sorry for the log delay i had to out of town for business.
i have gotten the sbc to register ext to pbx and make calls. now i need to get the brekeke to accept incoming calls from ITSP trough the sbc and Send calls to ITSP though the sbc. how can i do that using ars and dial plan |
|
Back to top |
|
janP Brekeke Master Guru
Joined: 25 Nov 2007 Posts: 336
|
Posted: Mon Mar 28, 2016 9:51 am Post subject: |
|
|
Have you tried Brekeke PBX without the SBC? |
|
Back to top |
|
rsmithidgc Brekeke Member
Joined: 22 Mar 2016 Posts: 16
Location: mobile al
|
Posted: Mon Mar 28, 2016 10:40 am Post subject: |
|
|
yes
i can setup to work with out the SBC but i would like to have it in line. |
|
Back to top |
|
janP Brekeke Master Guru
Joined: 25 Nov 2007 Posts: 336
|
Posted: Mon Mar 28, 2016 12:07 pm Post subject: |
|
|
Does the SBC work as outbound proxy? so do you need to specify SBC's IP address as SIP destination? |
|
Back to top |
|
rsmithidgc Brekeke Member
Joined: 22 Mar 2016 Posts: 16
Location: mobile al
|
Posted: Mon Mar 28, 2016 12:55 pm Post subject: |
|
|
yes it dose kinda.
i am useing Blox SBC |
|
Back to top |
|
janP Brekeke Master Guru
Joined: 25 Nov 2007 Posts: 336
|
Posted: Mon Mar 28, 2016 1:15 pm Post subject: |
|
|
Have you made ARS for connecting to the ITSP ? Does it work without the SBC? |
|
Back to top |
|
rsmithidgc Brekeke Member
Joined: 22 Mar 2016 Posts: 16
Location: mobile al
|
Posted: Tue Mar 29, 2016 1:48 pm Post subject: |
|
|
that is where i am now stuck is gettinng the ars config |
|
Back to top |
|
janP Brekeke Master Guru
Joined: 25 Nov 2007 Posts: 336
|
|
Back to top |
|
rsmithidgc Brekeke Member
Joined: 22 Mar 2016 Posts: 16
Location: mobile al
|
Posted: Wed Mar 30, 2016 7:00 am Post subject: |
|
|
thank you janp i have looked at the wiki page
what i need is for the brekeke to accecpt calls comming from 123.23.1.1 with out auth then to send calls to same address when 9 is dialed |
|
Back to top |
|
janP Brekeke Master Guru
Joined: 25 Nov 2007 Posts: 336
|
Posted: Wed Mar 30, 2016 11:04 am Post subject: |
|
|
For disabling the auth if an INVITE is sent from 123.23.1.1, add this DialPlan rule in the top of the DialPlan page.
Matching Patterns | $request = ^INVITE $addr = 123.23.1.1$
| Deploy Patterns | $auth = off $continue = true
|
For sending a call to 123.23.1.1 when 9 is dialed, add ARS route in the PBX. |
|
Back to top |
|
rsmithidgc Brekeke Member
Joined: 22 Mar 2016 Posts: 16
Location: mobile al
|
Posted: Wed Mar 30, 2016 12:45 pm Post subject: |
|
|
thank you
the problem was resolved with the help of the itsp. |
|
Back to top |
|
janP Brekeke Master Guru
Joined: 25 Nov 2007 Posts: 336
|
Posted: Wed Mar 30, 2016 3:43 pm Post subject: |
|
|
great! |
|
Back to top |
|
|