Author |
Message |
tho2016 Brekeke Junior Member
Joined: 15 Jun 2016 Posts: 6
|
Posted: Thu Jun 16, 2016 6:52 am Post subject: HOW make ARS to receive the call from PSTN via gateway |
|
|
1. Brekeke Product Name and Version:
3.4.5.1
2. Java version:
1.7.0_91
3. OS type and the version: linux
2.6.32-573.12.1.el6.x86_64
4. UA (phone), gateway or other hardware/software involved:
Gateway mediatrix FXO
5. Your problem:
How make ARS to receive the call from PSTN to transfer extension number.
Thanks your help! |
|
Back to top |
|
janP Brekeke Master Guru
Joined: 25 Nov 2007 Posts: 336
|
|
Back to top |
|
Mr Tho Brekeke Addict
Joined: 25 May 2016 Posts: 25
|
Posted: Wed Jun 22, 2016 6:19 pm Post subject: |
|
|
This guide only use for Mediatrix and Brekeke same network.
How about Brekeke is IP public, gateway is ip private.
in Mediatrix, you must config call router.
Not easy as this link http://wiki.brekeke.com/wiki/Mediatrix-1204 |
|
Back to top |
|
llucy Brekeke Talented
Joined: 31 Jan 2014 Posts: 52
|
Posted: Mon Aug 01, 2016 9:21 pm Post subject: |
|
|
Mr Tho,
If you want to have a gateway behind NAT or with a dynamic IP address, you would need to register the gateway to the PBX.
You can route outbound calls to the gateway with [Target] = @<registered ID> in the deploy pattern at the ARS.
Lucy |
|
Back to top |
|
tho2016 Brekeke Junior Member
Joined: 15 Jun 2016 Posts: 6
|
Posted: Thu Sep 01, 2016 12:59 am Post subject: |
|
|
Hi all,
I know how to config on ARS with gateway, now it work fine with mediatrix gateway. |
|
Back to top |
|
|