Author |
Message |
desmondholt Brekeke Newbie
Joined: 18 Aug 2016 Posts: 3
Location: Nashville
|
Posted: Thu Aug 18, 2016 12:55 pm Post subject: multiple CUCMs |
|
|
1. Brekeke Product Name and Version:SIP Server 3.4.7.2
2. Java version:7.60
3. OS type and the version:Server 2012 R2
4. UA (phone), gateway or other hardware/software involved: Cisco CUCM
5. Your problem: I have a customer that is changing to a new Cisco call manager due to moving to Iphones from Cisco phones. They are rolling this out one floor at a time over a period of a few months so they will have 2 active CUCM's until they are finished. They are wanting to send calls to both CUCM's through Brekeke at the same time depending on the range of the extensions. I did find out today that the phone numbers are going to be in 2 completely separate ranges, if that helps in the creation/editing of the dial plan. (example - 555-1000 - 555-2000 goes to CUCM-1 : 555-2001 through 555-3000 goes to CUCM-2. Is this possible? I have searched through the Wiki and the forums with no luck. I would appreciate any ideas, and thanks! |
|
Back to top |
|
Tata Brekeke Master Guru
Joined: 27 Jan 2008 Posts: 223
|
Posted: Fri Aug 19, 2016 12:40 am Post subject: |
|
|
Hi desmondholt,
It is possible with Brekeke PBX's ARS function. It can route a call to multiple destinations depending on routing rules such as dialed numbers.
You can download Brekeke PBX from the page below.
http://www.brekeke.com/downloads/pbx.php |
|
Back to top |
|
tlsoren Brekeke Addict
Joined: 15 Feb 2012 Posts: 36
Location: Raleigh, NC
|
Posted: Fri Aug 19, 2016 10:36 am Post subject: |
|
|
Hello Desmond,
From your description, I believe this would work:
2 separate Dial Rules
Matching:
%request=^INVITE
To=sip:(5551.+)
Deploy:
To=%1@(CUCM-1 IP)
Matching:
%request=^INVITE
To=sip:(5552.+)
Deploy:
To=%1@(CUCM-2 IP)
First rule sends all Invites from 5551000-5551999 to CUCM 1
Second Rule sends all Invites from 5552000-5552999 to CUCM 2 _________________ TLS |
|
Back to top |
|
Laurie Brekeke Master Guru
Joined: 07 Jan 2008 Posts: 242
|
Posted: Fri Aug 19, 2016 12:08 pm Post subject: |
|
|
tlsoren's idea meets the requirement.
I did some changes as this.
Rule1: 5551000-5552000
Matching Patterns | $request = ^INVITE $getUri(To) = ^sip:(5551.*)@|^sip:(5552000)@
| Deploy Patterns | To = sip:%1@<CUCM-1's IP>
|
Rule2: 5552001-5553000
Matching Patterns | $request = ^INVITE $getUri(To) = ^sip:(5552.*)@|^sip:(5553000)@
| Deploy Patterns | To = sip:%1@<CUCM-2's IP>
|
|
|
Back to top |
|
|