Brekeke Forum Index » Brekeke PBX Forum

Post new topic   Reply to topic
HOW make ARS to receive the call from PSTN via gateway
Author Message
tho2016
Brekeke Junior Member


Joined: 15 Jun 2016
Posts: 6

PostPosted: Thu Jun 16, 2016 6:52 am    Post subject: HOW make ARS to receive the call from PSTN via gateway Reply with quote

1. Brekeke Product Name and Version:
3.4.5.1
2. Java version:
1.7.0_91
3. OS type and the version: linux
2.6.32-573.12.1.el6.x86_64
4. UA (phone), gateway or other hardware/software involved:
Gateway mediatrix FXO
5. Your problem:
How make ARS to receive the call from PSTN to transfer extension number.

Thanks your help!
Back to top
View user's profile
janP
Brekeke Master Guru


Joined: 25 Nov 2007
Posts: 336

PostPosted: Mon Jun 20, 2016 2:12 pm    Post subject: Reply with quote

Have you found this?
http://wiki.brekeke.com/wiki/Mediatrix-1204
Back to top
View user's profile
Mr Tho
Brekeke Addict


Joined: 25 May 2016
Posts: 25

PostPosted: Wed Jun 22, 2016 6:19 pm    Post subject: Reply with quote

janP wrote:
Have you found this?
http://wiki.brekeke.com/wiki/Mediatrix-1204


This guide only use for Mediatrix and Brekeke same network.
How about Brekeke is IP public, gateway is ip private.
in Mediatrix, you must config call router.
Not easy as this link http://wiki.brekeke.com/wiki/Mediatrix-1204
Back to top
View user's profile
llucy
Brekeke Talented


Joined: 31 Jan 2014
Posts: 52

PostPosted: Mon Aug 01, 2016 9:21 pm    Post subject: Reply with quote

Mr Tho,

If you want to have a gateway behind NAT or with a dynamic IP address, you would need to register the gateway to the PBX.
You can route outbound calls to the gateway with [Target] = @<registered ID> in the deploy pattern at the ARS.


Lucy
Back to top
View user's profile
tho2016
Brekeke Junior Member


Joined: 15 Jun 2016
Posts: 6

PostPosted: Thu Sep 01, 2016 12:59 am    Post subject: Reply with quote

Hi all,

I know how to config on ARS with gateway, now it work fine with mediatrix gateway.
Back to top
View user's profile
Display posts from previous:   
Post new topic   Reply to topic    Brekeke Forum Index » Brekeke PBX Forum All times are GMT - 7 Hours
Page 1 of 1