Brekeke Forum Index » Brekeke PBX Forum

Post new topic   Reply to topic
Set the Ring timeout of an IVR for more than 1 minute
Author Message
sistemascec
Brekeke Junior Member


Joined: 09 Jun 2017
Posts: 6

PostPosted: Thu Jul 13, 2017 1:07 pm    Post subject: Set the Ring timeout of an IVR for more than 1 minute Reply with quote

1. Brekeke Product Name and Version: 3.7.6.6

2. Java version: jre1.8.0_131

3. OS type and the version: Windows Server 2012

4. UA (phone), gateway or other hardware/software involved: Cisco pone, zoiper and x-lite

5. Your problem:

How can I set the Ring timeout (sec) of an IVR auto attendant for more than 1 minute while answering the selected extension. I've tried changing the value to 200 seconds for example but it always ends after a minute. I have also modified the same parameter in the extension but behave the same.
In PBX system settings the Ringing Timeout (ms) parameter (ms) has the value of 240000
Back to top
View user's profile
Brett
Brekeke Addict


Joined: 23 Dec 2014
Posts: 46
Location: CA

PostPosted: Wed Jul 19, 2017 11:04 am    Post subject: Reply with quote

Hi sistemascec,

In my environment, I set as following and it works well.

IVR -> Ring timeout (sec) = 200
Select the extension -> Ring timeout(sec) =200

Other system settings are default.

Thank you.
Brett

_________________
Brett
Back to top
View user's profile
sistemascec
Brekeke Junior Member


Joined: 09 Jun 2017
Posts: 6

PostPosted: Mon Aug 14, 2017 8:45 am    Post subject: Reply with quote

not work yet
Back to top
View user's profile
Brett
Brekeke Addict


Joined: 23 Dec 2014
Posts: 46
Location: CA

PostPosted: Mon Aug 21, 2017 5:27 pm    Post subject: Reply with quote

>not work yet

Umm...
Your SIP device may disconnect a call like sending cancel.

Please check it, just in case.

Thank you.

_________________
Brett
Back to top
View user's profile
Display posts from previous:   
Post new topic   Reply to topic    Brekeke Forum Index » Brekeke PBX Forum All times are GMT - 7 Hours
Page 1 of 1