Can not start Brekeke Service

cdonohue · Brekeke Newbie Joined: 18 Apr 2007 Posts: 2

1. Brekeke Product Name and version:
SIP Server 2_0_7_2
2. Java version:
jre1.6.0_01
3. OS type and the version:
MS 2003 Server (w/ latest patches)
4. UA (phone), gateway or other hardware/software involved:
N/A
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
N/A
6. Your problem:
Can not start the Brekeke Service. The service does not start, either manually or automatically at boot.

The error message returned is:
"Windows could not start the Brekeke SIP Server on Local Computer. For more info, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 0."

Thanks,
Charlie

voipwell.com · Posted: Wed Apr 18, 2007 1:34 pm Post subject:

Charlie,

Make sure no other application is using port 8080tcp and 5060udp on your server. I would uninstall brekeke. Go to programfiles/brekeke and remove that directory, reboot and install again. Another user also reported this problem and we solved it by removing Java 6 and installing Java sdk 1.5.0.11. Do a google search for "sun java previous versions" and it will lead you to sun's previous version download page.

Nick

cdonohue · Brekeke Newbie Joined: 18 Apr 2007 Posts: 2

Hi Nick,
It was the version of Java that was causing the problem. I was able to back down to the version you suggested. Everything worked correctly after that.

Thanks,
Charlie