Edit users

loco_tdg · Brekeke Member Joined: 25 Apr 2007 Posts: 13

1. Brekeke Product Name and version:

2. Java version:

3. OS type and the version:

4. UA (phone), gateway or other hardware/software involved:

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :

6. Your problem:

Hi, i work with pbx of brekeke, i create the users in users in the pbx, do i have to create them in the sip server too??

voipwell.com · Posted: Wed May 30, 2007 1:37 pm Post subject:

Hi,

You create users in the Sip Server so the users can register to your system. You don't have to create the user in the pbx for the user to call another user but if you want the user to be able to use the pbx functions like voice mail and call forwarding etc then you must also enter a user in the pbx.

Nick

loco_tdg · Brekeke Member Joined: 25 Apr 2007 Posts: 13

I have created the users in the pbx, do i have to create users in the sip server?

voipwell.com · Posted: Wed May 30, 2007 4:28 pm Post subject:

loco_tdg · Brekeke Member Joined: 25 Apr 2007 Posts: 13

One more question.

What would happen if I created the users in the pbx and didn`t created those in the sip server?

voipwell.com · Posted: Mon Jun 04, 2007 6:30 pm Post subject:

Nothing. A PBX user only adds additional services to a sip user.

mexsip · Posted: Mon Jun 04, 2007 9:02 pm Post subject:

If you have authentication enabled on your sipserver, your UAs will not be able to register at sipserver, if you didn't create your users at sipserver.

If you don't use authentication, creation of user on pbx is enough.

Pablo.

voipwell.com · Posted: Tue Jun 05, 2007 6:59 am Post subject:

That's right Pablo, but if you don't have authentication set to on in your sip server anyone in the world can use your pbx without permission. You should only set it up without auth for testing.