SIP Trunk from AVAYA IP Office to Brekeke SIP Server

TelcoCarrier · Brekeke Newbie Joined: 13 Sep 2007 Posts: 2

1. Brekeke Product Name and version: 2.0

2. Java version: 1.6.2

3. OS type and the version: Windows Server 2003

4. UA (phone), gateway or other hardware/software involved: SJPhone

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html : 2

6. Your problem:

Is it possible to configure a SIP Trunk in the Brekeke SIP Server and connect it to the AVAYA IP Office System which is capable to handle SIP Trunks. Idea behind this configuration is to have standard sip client connected to the Brekeke SIP Server and routing all calls for the PSTN network over the AVAYA PBX and for internal communication over the Brekeke SIP Server.
Any information is highly apreciated

peng · Brekeke Guru Joined: 20 Jul 2005 Posts: 110

I heard that someone used AVAYA and Brekeke together.

TelcoCarrier · Brekeke Newbie Joined: 13 Sep 2007 Posts: 2

Perhaps an other way to get more response on my initial question.

How to define in brekeke SIP server a trunk configuration?

peng · Brekeke Guru Joined: 20 Jul 2005 Posts: 110

Have you already tried to set it up?

If so, show us your configuration.
Oterwise we cannot understand what you want to do.

imcdona · Brekeke Member Joined: 15 Nov 2006 Posts: 11

I am currently using Brekek as our front end SIP server that routes calls to Avaya SIP Enablement Services. The setup works great. I am unsure about IP office though.