Author |
Message |
ata-Khan Brekeke Newbie
Joined: 01 Oct 2007 Posts: 1
|
Posted: Mon Oct 01, 2007 10:03 am Post subject: soft switch unable to register to brekeke, accepting traffic |
|
|
1. Brekeke Product Name and version: Brekele sip server
2. Java version:
3. OS type and the version:
windows
4. UA (phone), gateway or other hardware/software involved:
soft phone and softswitch
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem:
Hello all, so I am trying to send calls from my soft switch to the Brekeke SIP server and I want the sip server to route the call to the appropriate registered soft phone. the problem is that the soft switch I am sending the call from does not register to SIP SERVER. is there anyway to accept and route calls without registration????!!!
I'd greatly appriciate your responses.
voipa-z@hotmail.com |
|
Back to top |
|
Willtsuru Brekeke Talented
Joined: 23 Jul 2006 Posts: 90
Location: Japan
|
Posted: Sat Oct 06, 2007 10:32 am Post subject: |
|
|
Hi; I think its no possible because the comunication in Brekeke sip server is only allowed if the Uas are registered in the server. Its usefull also to prevent spam in the server.You can try set register and inveite =off in the configuration of the sipserver to try to sent these calls but your softswitch will need register in sipserver but dont need be listed in the registered user database of the sipserver.
good luck. |
|
Back to top |
|
peng Brekeke Guru
Joined: 20 Jul 2005 Posts: 110
|
Posted: Mon Oct 08, 2007 11:35 am Post subject: |
|
|
hi ata-Khan,
> the problem is that the soft switch I am sending the call from does not register to SIP SERVER. is there anyway to accept and route calls without registration????!!!
I think it should not matter if it is registered or not.
Show us your settings for your softswitch. |
|
Back to top |
|
|