Author |
Message |
onecentld.com Brekeke Junior Member
Joined: 20 Jun 2007 Posts: 6
|
Posted: Wed Jun 20, 2007 12:06 pm Post subject: dialplan for DID routing |
|
|
SIP Server dialplan....
I can't figure out how to set up a matching patern to direct particular incomming lines to different servers
we have diferent DID's that need to be directed to diferent servers
Thanks |
|
Back to top |
|
Willtsuru Brekeke Talented
Joined: 23 Jul 2006 Posts: 90
Location: Japan
|
Posted: Sat Oct 06, 2007 9:21 am Post subject: |
|
|
Hi sorry delay in reply you but I saw your post just now.
To setup yours different servers to receive incoming call from different DIDs you need first of all know wich IP belongs to each DID.
Example if you have a DID like: 14445252525 and the calls from this DID coems from the IP 231.251.22.22 and if you are with register=on and Invite=on then you must setup in each server as something like this dial plan:
Maching pattern
$request=^INVITE
$addr=^231\.251\.22.22
Deploy Patterns | $auth = false $target = localhost:15060
|
Just remeber that in major cases the DID provider only permit point a DID to only one server at time.
Hope this answer was helpfull for you.
bye voiptechjapn@ibc.ne.jp |
|
Back to top |
|
hari Brekeke Junior Member
Joined: 02 Nov 2007 Posts: 6
|
Posted: Mon Nov 12, 2007 3:00 am Post subject: Does the Brekeke Server supports Call Forwarding/Transfer |
|
|
Hi,
Does the Brekeke server supports the Call forwarding/Transfer functionality.
If yes Kindly let me know the settings for the same.
Thanks in advance.
Rgds
Hari |
|
Back to top |
|
voipwell.com Partner PBX
Joined: 20 Sep 2005 Posts: 528
Location: Tannersville, Pennsylvania
|
Posted: Mon Nov 12, 2007 12:36 pm Post subject: |
|
|
I believe they are pbx only functions. You can call forward with a dialplan the same way you route the calls in the first place but if it's busy there is no built in function to divert it to another phone that I am aware of.
Nick |
|
Back to top |
|
hari Brekeke Junior Member
Joined: 02 Nov 2007 Posts: 6
|
Posted: Mon Nov 12, 2007 10:40 pm Post subject: Thanx |
|
|
Thanx Nick. |
|
Back to top |
|
|