Author |
Message |
ike609 Brekeke Newbie
Joined: 19 Nov 2007 Posts: 3
|
Posted: Mon Nov 19, 2007 2:38 pm Post subject: NAT Issues No Voice / Audio once connected. |
|
|
1. Brekeke Product Name and version:
Brekeke SIP Server 2.0.7.2/217
2. Java version:
1.6.0_02
3. OS type and the version:
Windows XP 5.1
4. UA (phone), gateway or other hardware/software involved:
4 - Handytone 286
5. Select your network pattern
Pattern 3
6. Your problem:
When i place a call or receive a call there is no incoming or outgoing voice. It dials, rings, and other party picks up and then it is just silent.
I have Port forwarding on my router and it is forwarding ports:
5060
10000 thru 19999
to my SIP server.
User show up as registered just fine.
I have all of my Handytone 286's set as DMZ host which should allow complete access to the device without any port restrictions.
What do you guys think?
Thanks in advance,
Gary |
|
Back to top |
|
redroof Brekeke Talented
Joined: 16 Nov 2007 Posts: 97
|
Posted: Mon Nov 19, 2007 6:59 pm Post subject: |
|
|
Try disabling "NAT Traversal" in the Handytone 286. |
|
Back to top |
|
ike609 Brekeke Newbie
Joined: 19 Nov 2007 Posts: 3
|
Posted: Tue Nov 20, 2007 11:40 am Post subject: |
|
|
It was off and i tried it both ways.... |
|
Back to top |
|
voipwell.com Partner PBX
Joined: 20 Sep 2005 Posts: 528
Location: Tannersville, Pennsylvania
|
Posted: Tue Nov 20, 2007 6:55 pm Post subject: |
|
|
I would downgrade to java 1.5. I know 1.6 doesn't work with the pbx. |
|
Back to top |
|
ike609 Brekeke Newbie
Joined: 19 Nov 2007 Posts: 3
|
Posted: Wed Nov 21, 2007 1:26 pm Post subject: |
|
|
Downgraded to 1.5.0_14
And still have the same issue.
I can PM my ip addresses to someone if they want to look at my grandstream devices to check settings...
Thanks, Gary |
|
Back to top |
|
|