| Author |
Message |
edg0mez
Brekeke Newbie
Joined: 15 Nov 2007
Posts: 3
|
 Posted: Thu Nov 15, 2007 4:18 am Post subject: Caller ID Problem |
 |
|
1. Brekeke Product Name and version:
Sip Server 2.1.5.6
2. Java version:
1.4.2
3. OS type and the version:win2k server edition
4. UA (phone), gateway or other hardware/software involved:
eyebeam, pbxnsip gateway
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem:
Caller ID of the caller did not display on the called party.
Here are the scenario: Eyebeam = Brekeke Sip Proxy = Pbxnsip gateway = X Lite
Here is our dial plan:
| Matching Patterns | $request = ^INVITE
To = sip:21(.*)@
| | Deploy Patterns | From = 202<sip:202@ip_addr_pbxnsip>
To = sip:21%1@ip_addr_pbxnsip
|
The caller 31309( registered to sip proxy) dials 21310(registered to pbxnsip)
caller ID displays 202 instead of 31309. This 202 is an account of pbxnsip that used to tie trunk the sip proxy server to pbxnsip gateway.
Need help. Thanks in advance.
Ed Gomez
DPC Philippines |
|
| Back to top |
|
edg0mez
Brekeke Newbie
Joined: 15 Nov 2007
Posts: 3
|
| Posted: Fri Nov 16, 2007 5:34 am Post subject: Caller ID Problem |
|
|
 can anybody help please  |
|
| Back to top |
|
jelly
Brekeke Talented
Joined: 20 Jun 2007
Posts: 62
|
| Posted: Fri Nov 16, 2007 10:56 am Post subject: |
|
|
| you set From=202<sip:202@ip_addr_pbxnsip> in Deploy Pattern, no matter which phone you use, 202 always display on the phone , try to delete From=202<sip:202@ip_addr_pbxnsip>. i think that will work. |
|
| Back to top |
|
edg0mez
Brekeke Newbie
Joined: 15 Nov 2007
Posts: 3
|
| Posted: Mon Nov 19, 2007 4:39 am Post subject: Caller ID Problem |
|
|
Hi Jelly,
It works! Thanks, you are a great help.
Regards,
Ed Gomez |
|
| Back to top |
|
|
