Author |
Message |
Balajee Nagarajan Brekeke Newbie
Joined: 17 Nov 2007 Posts: 2
|
Posted: Mon Nov 19, 2007 3:57 pm Post subject: Adding header |
|
|
1. Brekeke Product Name and version:
2.0.7.2
2. Java version:
1.5
3. OS type and the version:
Linux
4. UA (phone), gateway or other hardware/software involved:
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem:
Plan to use Brekeke SIP server as a signaling proxy with a bunch of phones registered to the proxy.
Need to know if it is possible to add a auto answer to the INVITE that goes from Brekeke to the phones. |
|
Back to top |
|
voipwell.com Partner PBX
Joined: 20 Sep 2005 Posts: 528
Location: Tannersville, Pennsylvania
|
Posted: Mon Nov 19, 2007 9:36 pm Post subject: |
|
|
Sounds like you are trying to tackle paging yes? You should be able to add the header generic "Call-Info: answer-after=0". This project is on our list of to-do's also and my understanding is it will work if you know the hard phone supports it. Xlite doesn't.
Keep in mind that the phones will always auto-answer so a way must be found to only auto-answer calls intended for paging if paging is your objective.
Nick |
|
Back to top |
|
Balajee Nagarajan Brekeke Newbie
Joined: 17 Nov 2007 Posts: 2
|
Posted: Tue Nov 20, 2007 12:58 pm Post subject: |
|
|
thanks for the reply.
I know that my hard phone supports this header (polycom). Where and how do I add this header? |
|
Back to top |
|
|