Adding header

Balajee Nagarajan · Brekeke Newbie Joined: 17 Nov 2007 Posts: 2

1. Brekeke Product Name and version:
2.0.7.2
2. Java version:
1.5
3. OS type and the version:
Linux
4. UA (phone), gateway or other hardware/software involved:

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :

6. Your problem:

Plan to use Brekeke SIP server as a signaling proxy with a bunch of phones registered to the proxy.
Need to know if it is possible to add a auto answer to the INVITE that goes from Brekeke to the phones.

voipwell.com · Posted: Mon Nov 19, 2007 9:36 pm Post subject:

Sounds like you are trying to tackle paging yes? You should be able to add the header generic "Call-Info: answer-after=0". This project is on our list of to-do's also and my understanding is it will work if you know the hard phone supports it. Xlite doesn't.

Keep in mind that the phones will always auto-answer so a way must be found to only auto-answer calls intended for paging if paging is your objective.

Nick

Balajee Nagarajan · Brekeke Newbie Joined: 17 Nov 2007 Posts: 2

thanks for the reply.
I know that my hard phone supports this header (polycom). Where and how do I add this header?