Author |
Message |
vikkosung Brekeke Newbie
Joined: 14 Nov 2007 Posts: 3
|
Posted: Mon Dec 03, 2007 1:05 am Post subject: PSTN Call Using VoIP GW |
|
|
1. Brekeke Product Name and version: 2.0.7.2 Pro
2. Java version: 1.6.0_01
3. OS type and the version: Vista
4. UA (phone), gateway or other hardware/software involved: CISCO3640 (2 x FXO)
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem:
Unsuccessful registering of CISCO3640 in ARS;
I got error "405 Method Not Allowed"; I put "sip:1234@172.16.66.249" in URI field and "172.16.66.240" in Proxy Address field where .249 is CISCO3640 and .240 is Brekeke SIP server. Is that correct? |
|
Back to top |
|
slaider Brekeke Member
Joined: 18 Aug 2006 Posts: 13
Location: ITA
|
Posted: Wed Dec 19, 2007 2:16 pm Post subject: |
|
|
Release IOS cisco ??
print sh run configuration.
Bye
Slaider |
|
Back to top |
|
voipwell.com Partner PBX
Joined: 20 Sep 2005 Posts: 528
Location: Tannersville, Pennsylvania
|
Posted: Wed Dec 19, 2007 5:01 pm Post subject: |
|
|
Hi,
Are you trying to register the cisco to the brekeke or the brekeke to the cisco. If you are trying to register the cisco to the brekeke you don't use ars to do it. If you are trying to register the brekeke to the cisco then use the cisco ip address for both the url and proxy. Also, I wouldn't use java 1.6. |
|
Back to top |
|
lakeview Brekeke Master Guru
Joined: 15 Nov 2007 Posts: 319
Location: Florida
|
Posted: Thu Dec 20, 2007 1:38 pm Post subject: |
|
|
Try disabling Session-Timer and 100rel at the ARS.
Because CISCO3640 may not support them. |
|
Back to top |
|
|