Author |
Message |
farishryan Brekeke Newbie
Joined: 25 Mar 2008 Posts: 3
|
Posted: Wed Mar 26, 2008 12:48 pm Post subject: Radius IP Based Authetication On incoming INVITE |
|
|
1. Brekeke Product Name and version:
SIP Server 2.1 , Radius Authentication 1.1.2
2. Java version:
3. OS type and the version:
Windows XP
4. UA (phone), gateway or other hardware/software involved:
Sjphone, Xlite
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem:
Hi,
We have managed Brekeke SIP server to Authenticate ( Both Register and INVITE ) SIP UA Via Radius Backend, But we need to do IP based Authentication for the Gateway which send direct INVITE without Registering using user/pass, in that case Brekeke send Radius packets with "anonymous" as user name. is it possible to IP Authentication for GW with any Dialplan tricks?
Thanks in Advance
Ryan B. Farish |
|
Back to top |
|
davidste Brekeke Newbie
Joined: 05 Mar 2008 Posts: 1
|
Posted: Thu Mar 27, 2008 10:59 am Post subject: WHY SUPPORT IS NOT ANSWERING? |
|
|
I dont understand why the support team does not answer! |
|
Back to top |
|
Tata Brekeke Master Guru
Joined: 27 Jan 2008 Posts: 223
|
Posted: Thu Mar 27, 2008 5:50 pm Post subject: |
|
|
This BBS is the User Discussion Forums.. not support forum.
If you need a support, you need to contact Brekeke or reseller.
tata |
|
Back to top |
|
Tata Brekeke Master Guru
Joined: 27 Jan 2008 Posts: 223
|
Posted: Fri Mar 28, 2008 10:39 am Post subject: |
|
|
Hi..
If you want to accept a certain IP address without the authentication, try the DialPlan below.
Matching Patterns | $request = ^INVITE $addr = <GATEWAY_IP_ADDRESS>
|
[DeployPattern:]
$auth = off
---------------
See the DialPlan reference for more details.
tata |
|
Back to top |
|
farishryan Brekeke Newbie
Joined: 25 Mar 2008 Posts: 3
|
Posted: Tue Apr 01, 2008 6:10 am Post subject: |
|
|
Tata wrote: |
If you want to accept a certain IP address without the authentication, try the DialPlan below.
Matching Patterns | $request = ^INVITE $addr = <GATEWAY_IP_ADDRESS>
|
[DeployPattern:]
$auth = off
---------------
See the DialPlan reference for more details.
tata |
but this will not make authentication via Radius. i need radius authentication, i don't want to add IP manually on Brekeke config.
thanks |
|
Back to top |
|
Mohney Brekeke Talented
Joined: 20 Nov 2007 Posts: 79
|
|
Back to top |
|
farishryan Brekeke Newbie
Joined: 25 Mar 2008 Posts: 3
|
Posted: Wed Apr 02, 2008 12:00 am Post subject: |
|
|
yes, Thats what we are using, and i mention it on my first post about it with version number. |
|
Back to top |
|
Mohney Brekeke Talented
Joined: 20 Nov 2007 Posts: 79
|
Posted: Thu Apr 03, 2008 10:18 am Post subject: |
|
|
Hi
Did you find the source code in the plug-in package?
You can customize it for your purpose. |
|
Back to top |
|
|