407 Proxy Authentication Required

hbravo · Posted: Thu Apr 17, 2008 7:50 pm Post subject: 407 Proxy Authentication Required

1. Brekeke Product Name and version: SIP Server 2.2 alpha

3. OS type and the version: windows xp

4. UA (phone), gateway or other hardware/software involved: trixbox, xlite

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :

All phones and PBX/SIP Server are in the same LAN.

6. Your problem:
I'm trying to communicate OCS Speech Server 2007 to make outbound calls through a Trixbox IP PBX Server, using Brekeke SIP Proxy in the middle to convert sip over tcp to udp. But I always get 407 Proxy authentication required. Authentication is off.

Dial Plan:
$request=INVITE
To=(.+)

Deploy Patterns

$target = trixbox_ip
To = %1

james · Brekeke Master Guru Joined: 10 Dec 2007 Posts: 494

Did you disable Authentication at both Brekeke SIP Server and trixbox?

hbravo · Posted: Fri Apr 18, 2008 6:59 pm Post subject:

Yes I did. Authentication is disabled in Brekeke, but not in Trixbox.

james · Brekeke Master Guru Joined: 10 Dec 2007 Posts: 494

Can you disable the Authentication in Trixbox too?
If not, you need to set the correct user password in the client.

hbravo · Posted: Mon Apr 21, 2008 1:44 pm Post subject:

Do you know how to disable authentication in Asterisk/Trixbox?

james · Brekeke Master Guru Joined: 10 Dec 2007 Posts: 494

Hector ,

I don't know about Asterisk/Trixbox.
You can use Brekeke PBX instead of Asterisk...