trixbox + bss

[amatteo78]

1. Brekeke Product Name and version: 2.1.6.6

2. Java version: 5.5

3. OS type and the version: Linux Debian

4. UA (phone), gateway or other hardware/software involved:

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :

6. Your problem:

Hi,

I setup fine bss, I create some user and pass, I active option registration=yes so every need register to call, and all work.

Some my customer have trixbox in your office, they create a trunk to my bss but our trixbox not register.

How I can connect trixbox to my bss to received/send calls ??

Bye

Matteo

[Laurie]

Are you using an Authentication for REGISTER ?
If so.. your customers need to set valid username/password at their trixbox.. otherwise, you need to accept their IP address by the DialPlan.

Laurie

[amatteo78]

Thank you to reply

yes, I use AUTH to register, but trixbox use valid account, but it not register... ?? why ??

[Mohney]

I'm using trixbox as a Brekeke's client.

Did you add the same user information at the SIP Server's User Authentication page?

[amatteo78]

yes, I add username and password in BSS Auth page...

[Mohney]

what kind of error response did the trixbox receive from the SIP Server?

[amatteo78]

Hi,

I received 401 Unathorized user, but today I try with other Trixbox and it register fine. I don't know.....???

Can you send me how configure trunk setting page on trixbox to use with BSS ?? example how register string, inbound call, outbound call, and other....

Thank you

Matteo

[Mohney]

It seems your Trixbox's problem.

Check the Trixbox's settings again..